Powder coatings for brake calipers MT-A1243 /MT-BW104GF / MT-301.727S
Product Description
MT-A1243 for brake components combines toughness and durability with excellent corrosion and chemical resistance. They also come in a range of colors to meet the varied design needs for brake pads, brake discs, calipers and other wheel hardware that is visible in an open wheel design.
Powder properties
| Chemical Type | Epoxy |
| Area of usage | Brake calipers |
| Apprearance | Smooth, glossy |
| Colour | Anthracite metallic |
| Gloss (60°) | 75 ± 5 GU |
| Density (g/cm3) | 1.55 ± 0.05 |
| Stoving schedule | 10 minutes at 180°C (time at object temperature) |
| Application | Electrostatic |
| StorageStability | Under dry, cool (<25°C) conditions, at least 12 months from production date |
Test Conditions
The results are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Substrate | Steel panels |
| Pretreatment | Bonder (WH/60/OC) iron phosphate |
| Film thickness | 70 µm |
| Cure schedule | 10 minutes at 180°C |
Mechanical Tests
| Adhesion | DIN EN ISO 2409 | Gt 0 |
| Erichsen cupping | DIN EN ISO 1520 | ≥ 4 mm |
Pre-treatment
Steel surfaces to be coated must be clean and free from grease. For maximum protection it is essential to pre-treat components prior to the application of MT-A1243. Iron Phosphate and Zinc Phosphate of ferrous metals improve corrosion resistance.
Application
MT-A1243 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Insulating Powder Coating | Product Features: High electrical insulation properties, with a large resistance coefficient and low dielectric constant, meeting the requirements... |
 |
Hydroxylated acrylic dispersion STD 2025 | Product Description Hydroxylated acrylic dispersion STD 2025 is a hydroxyfunctional polyacrylic dispersion designed for vehicle,machinery and anti... |
 |
Imitation Anodizing Coating Series | Key Features & Specifications FeatureSpecification / Benefit Anodizing-Like Matte Finish Replicates thesleek, low-gloss aesthetic ... |
 |
Shallow autumn thin gauze gold powder coating | Introduction Product Features With a special skin feel formula, the surface of the coating after powder solidification has a touch similar to t... |
 |
Polyurethane Powder Coatings | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance -Good transfer print ability -Better performance... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
