Powder coatings for brake calipers MT-A1243 /MT-BW104GF / MT-301.727S
Product Description
MT-A1243 for brake components combines toughness and durability with excellent corrosion and chemical resistance. They also come in a range of colors to meet the varied design needs for brake pads, brake discs, calipers and other wheel hardware that is visible in an open wheel design.
Powder properties
| Chemical Type | Epoxy |
| Area of usage | Brake calipers |
| Apprearance | Smooth, glossy |
| Colour | Anthracite metallic |
| Gloss (60°) | 75 ± 5 GU |
| Density (g/cm3) | 1.55 ± 0.05 |
| Stoving schedule | 10 minutes at 180°C (time at object temperature) |
| Application | Electrostatic |
| StorageStability | Under dry, cool (<25°C) conditions, at least 12 months from production date |
Test Conditions
The results are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Substrate | Steel panels |
| Pretreatment | Bonder (WH/60/OC) iron phosphate |
| Film thickness | 70 µm |
| Cure schedule | 10 minutes at 180°C |
Mechanical Tests
| Adhesion | DIN EN ISO 2409 | Gt 0 |
| Erichsen cupping | DIN EN ISO 1520 | ≥ 4 mm |
Pre-treatment
Steel surfaces to be coated must be clean and free from grease. For maximum protection it is essential to pre-treat components prior to the application of MT-A1243. Iron Phosphate and Zinc Phosphate of ferrous metals improve corrosion resistance.
Application
MT-A1243 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Cellulose ether STD20000S | Product Description This product is developed to improve the workability of cement- or gypsum-based dry-mix mortars. It can be used in plastering,... |
 |
Sand grain matte MT-03968004 | Introduction No. MT-039/68004 Color Brown Surface Sand grain matte System Weather-resistant polyester Scope of appli... |
 |
Metallic flat matte MT-019/74639 | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-019/74639 Color Gray Surface Metallic flat matte Sy... |
 |
PVF steel drum coating Factory Supplier | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com PVF steel drum coating is mainly used for packaging containers of chemical pesticide... |
 |
Ceramic powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Key Attributes ItemsDetails CAS No. 53808-41-6 Main Raw Material EPOXY Other N... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
