Powder coating for automobile springs
Product description
Powder coating for automobile springs is outdoor pure polyester powder coating with excellent weather resistance and mechanical properties, excellent flexibility and cold resistance.
Transportation packaging
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Application areas
Applicable to automobile springs and devices with high mechanical performance requirements.
Health and safety
Operators should wear dust masks during use to avoid inhaling dust, and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
Coating properties
| Test items | Inspection standard or method | Inspection index |
| Appearance | Visual inspection | Coating uniform, no burrs, bubbles and other defects |
| Film thickness | GB/T 1764 | ≥60 μm |
| Adhesion | GB/T 9286 | Level 0 or Level 1 |
| Impact | GB/T 1732 | ≥50Kg*cm |
| Neutral salt spray resistance | GB/T 1771 | 480h; Stroke area: unidirectional rust ≤2.0mm; Unstrike area: no abnormality |
| Water resistance | QCIT 484 | 240h No abnormality |
| Oil resistance | HG/T 3343 | 48h No abnormality |
| Gasoline resistance | GB/T 1734 | 8h No abnormality |
| Acid resistance | GB/T 9274 | 24h; No fuzziness, no spots, slight discoloration allowed |
| Alkali resistance | GB/T 9274 | 4h; No fuzziness, slight discoloration allowed |
| Moisture and heat resistance | GB/T 1740 | 500h No abnormality |
| Curing conditions | 200℃/15min | |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Tricresyl Phosphate MT-T306 | Product details Reference dosage: 0.5-3.0 (mass fraction) / % Quality standard: Appearance Clear oily liqui... |
 |
Amorphous aluminium silicate with a high degree of whiteness SODASIL P95 | Introduction CAS:1344-00-9 EINECS:215-684-8 Nature Amorphous aluminium and sodium silicate obtained by precipitation in an aqueous medium. Tec... |
 |
Ral9016 White Color Powder Coating | Gloss and color Range 5%-99% and above depending on the end requirement Full color range isavailable. Feature Specific gravity 1.2-1.5g/cm3 (v... |
 |
Polyurethane based powder coating MT-PA020G White | Product Description MT-PA020G is a polyurethane based powder coating, formulated without TGIC and is designed for exterior exposure offering excel... |
 |
Acrylic Powder Coatings – High-Performance Industrial Solutions | 1. Product Overview This product takes polyester resin and epoxy resin as the main base materials, integrating the excellent decorative performanc... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
