Epoxy Anti-Corrosion Dual-Resistance Powder Coating for Coal Mines
Product Introduction:
This product is formulated using phenolic epoxy resin and incorporates modified conductive polymers and conductive materials, combining the advantages of intrinsic and doped conductivity. It is specifically designed for conductive heavy-duty anti-corrosion powder coatings. The surface resistivity of the coating can reach below 10⁵ Ω, effectively eliminating static electricity accumulation in gas drainage pipes and preventing static sparks, thereby enhancing safety. The coating features high reactivity, strong adhesion, high cross-link density, and excellent resistance to chemicals, solvents, cathodic disbondment, as well as superior flexibility and impact resistance.
Product Usage:
Special anti-static and anti-corrosion coating for gas ventilation and drainage pipes in coal mines.
Product Features:
- Excellent adhesion to the substrate.
- First application of a new material combining intrinsic and doped conductivity.
- Good conductivity of the coating, with surface resistivity reaching 10⁵ Ω, effectively eliminating surface charge accumulation.
- Superior high-temperature cathodic disbondment resistance.
- Low melting temperature, high reactivity, high curing completion rate, and good mechanical properties.
- Contains composite flame retardants, providing certain flame-retardant effects.
Powder Performance:
| Property | Specification | Notes |
|---|---|---|
| Adhesion | Excellent | |
| Conductivity | Surface resistivity below 10⁵ Ω | |
| Cathodic Disbondment Resistance | Superior at high temperatures | |
| Flexibility | Extremely strong, passes 4/5 flattening and post-grooving tests | |
| Temperature Resistance | Good performance in high and low temperatures | |
| Flame Retardancy | Contains composite flame retardants |
Curing Conditions:
| Property | Specification | Notes |
|---|---|---|
| Temperature | Referenced to workpiece temperature | Deviations may affect performance |
| Heating Method | Medium-frequency heating or other heating methods |
Application Parameters:
| Parameter | Specification | Notes |
|---|---|---|
| Applicable Equipment | Frictional charging spray, corona electrostatic spray, dip coating, roll coating | |
| Film Thickness | 250-450um | Adjustable according to workpiece requirements |
Health and Safety:
| Property | Specification | Notes |
|---|---|---|
| Toxicity | Non-toxic | |
| Flammability | Non-flammable | |
| Regulation | GB15607-1995 | Coating operation safety regulations |
Precautions:
| Item | Specification | Notes |
|---|---|---|
| Outdoor Use | Not recommended | May cause fading and chalking |
| Surface Preparation | Oil-free, water-free, surface treatment to Sa21/2 level (GB/T8923), anchor pattern depth 40-100um, clean surface from dust and abrasives | |
| Preheating | Temperature controlled between 180-250°C, not exceeding 250°C | |
| Storage | Ventilated, dry, below 30°C, away from heat sources, corrosive chemicals, and solvents, avoid strong light, maximum stack height 5 layers, avoid long-term pressure, keep packaging sealed | |
| Curing Temperature | Preheat steel pipe surface to above 200°C for better curing completion rate |
Compliance Standards:
MT 181-88 “Safety Performance Testing Specifications for Plastic Pipes Used in Coal Mines”
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Thermosetting Special Powder Coating | I. Product Introduction In today’s world where extreme performance and environmental protection are both highly valued, the thermosetting sp... |
 |
2-AMINO-3,5-DIBROMO-6-METHYLPYRIDINE | Molecular Formula: C6H6Br2N2 Molecular Weight: 265.93 CAS Number: 91872-10-5 Boiling Point: 261.58°C Density: 1.991 g/cm³ It is a che... |
 |
Polyester Clear Powder Coatings | Introduction： This series of product are made of polyester resin (as hardener) and highly transparentmaterials. There are two types of products ar... |
|
|
Blue Matte Powder Coating | Introduction AttributeDetails CAS No. 53808-41-6 Place of Origin China Main Raw Material EPOXY Usage Furniture Paint... |
|
|
Metallic sand texture matte MT-049/7C130 | Introduction No. MT-049/7C130 Color Gray Surface Metallic sand texture matte System Polyester Scope of applicati... |
