Architectural aluminum powder coating MT-D34
Product Description
MT-D34 is a series of durable powder coatings specially formulated for the use on architectural aluminum which conforms to the performance requirements of GB5237.4 specification. MT- D34 is designed to offer significantly high gloss retention and resistance to color change combined with maximum film integrity to ensure long term cosmetic and functional protection. MT-D34 powder coatings are available in a selected range of colors including pearlescent effects in gloss, satin and matte finishes. Fine and coarse textured are also available.
Powder Properties
| Chemical Type | Polyester |
| Appearance | Smooth |
| Particle Size | Suitable for electrostatic spray |
| Specific Gravity | 1.3 – 1.7 g/cm³ |
| Gloss | 45 – 55% (depending on color) |
| Storage | Dry, cool conditions (open boxes must be resealed) |
| Shelf Life | 12 months below 25°C peak temperature 6 months below 30°C peak temperature |
| Stoving Conditions
(at object temperature) |
10 minutes at 200°C Failure to observe the curing conditions may cause differences in color, gloss, and/or the deterioration of the coating properties. |
Mechanical Tests
| Adhesion | GB/T 9286 | Pass Gt0 |
| Erichsen cupping | GB/T 9753 | Pass, 5 mm no crack or detachment of film |
| Impact resistance | GB/T 20624.2 | Pass, 50 InP Reverse, deformation no crack |
| Bend Test | GB/T 6742 | Pass, 3 mm no crack |
Pre-treatment
For maximum protection it is essential to pretreat components prior to the application of MT- D34. Aluminium components should receive the following pre-treatment in accordance of supplier’s recommendation.
Substrate
Aluminum – Multi-stage chrome chromate or chrome phosphate Galvanised.
Steel – Multi-stage zinc phosphate or chromate.
Steel – Multi-stage zinc or iron phosphate.
Application
MT-D34 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
|
|
Metallic flat matte MT-629/94777 | Introduction No. MT-629/94777 Color Champagne gold Surface Metallic flat matte System Super weather-resistant polyest... |
|
|
Woodgrain Thermal Transfer Powder Coatings | Introduction Product SegmentationApplication Fields General Thermal Transfer Powder Coating Interior surfaces of aluminum profiles, se... |
 |
Ultra-Pure Helium | Product Details Product Names Ultra-Pure Helium Purity Ultra-Pure Helium: ≥99.9999% High-Purity Helium: ≥99.999% Impurity Content (ppm)... |
|
|
High durability powder coatings MT-800 AM | Product Description MT-800 AM is a series of high durability powder coatings designed for exterior exposure. Tested against the most severe specif... |
 |
Antimicrobial and Antiviral Powder Coating | Product Introduction: This product is formulated using special resins, curing agents, and specialized antimicrobial agents. It features high react... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
