.

Antistatic powder coating

Introduction:

Made of antistatic materials, suitable for indoor and outdoor environments

Features:

The volume resistivity of the coating is as low as 106-1010 Ω· cm, which prevents the accumulation of static electricity on the surface of the equipment and protects the equipment.

It can resist static electricity for a long time.

Use:Suitable for coating and protection of the surface of electrical appliances and equipment to reduce static electricity accumulation.

Application parameters:

Curing time:200℃×10–15 minutes

Spraying method:High voltage electrostatic spraying 60-80 KV

Recommended film thickness:60-80 um

Physical properties:

Item Instrument Standard Test method
Pencil hardness Pencil hardness tester ≥ H GB/6739
Impact resistance Impact tester ≥ 50 kg.cm GB/T 1732
Bending resistance Bending tester ≤ 2mm GB/T 6742
Adhesion 100 grid test Level 0 GB/T 9286
Cup protrusion Cup protrusion tester ≥ 6 mm GB/T9753
Chemical properties:
Salt spray resistance ≥ 500 Hs ≥ 9 levels GB/T 1771
Moisture and heat resistance ≥ 1000 Hs Slight gloss loss GB/T 1740
Weather resistance (outdoor products) Artificial accelerated aging QUV-B313 240h ≥ 3 levels GB/T 1865

The above tests all use 0.8mm degreased and derusted cold-rolled steel plates, with a coating thickness of 40 to 80um. The performance indicators of the coating will vary slightly with the gloss.

This product does not contain heavy metals such as arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium, etc., and meets RoHS requirements.

Storage conditions:Store in a dry, ventilated room at around 25°C, avoid direct sunlight. Under this condition, the powder can be stored for 6-12 months. If it is overdue, it can be re-tested and can still be used if the results meet the requirements.

Note:The test indicators mentioned in this report are all data obtained from laboratory tests and are for reference only, not as a performance commitment for product application. The results may vary depending on environmental factors and other conditions.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Antimicrobial and Antiviral Powder Coating
Antimicrobial and Antiviral Powder Coating Product Introduction: This product is formulated using special resins, curing agents, and specialized antimicrobial agents. It features high react...
Metallic plane MT-629/93660
Metallic plane MT-629/93660 Introduction No. MT-629/93660 Color Brown Surface Metallic plane System Resin imported from Austria Packing Spec...
Powder coating for automobile wheel hub- Durable, Custom & OEM Supply
Powder coating for automobile wheel hub- Durable, Custom & OEM Supply Introduction Standard automobile powder coating is mainly used for automobile parts, such as automobile engines, aluminum wheels, chassis, filters...
Branched Copolyester Powder Coating
Branched Copolyester Powder Coating 1. Chlorinated Polyether (CPE) Powder Coatings High-Performance Industrial Protection & Insulation As a leading China-based manufacturer, we ...
Outdoor powder coatings
Outdoor powder coatings Introduction Outdoor powder coatings are advanced protective and decorative coatings designed for long-lasting performance. Applied as a dry powde...
All supplier products

Same products

Hot Melt Adhesive for Vacuum Insulation Panels
Hot Melt Adhesive for Vacuum Insulation Panels Seller: Foshan Rurga New Material Technology Co. ,Ltd Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ...
Hot Melt Adhesive for Packaging
Hot Melt Adhesive for Packaging Seller: Foshan Rurga New Material Technology Co. ,Ltd Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i...
Hot Melt Adhesive for Hygiene Products
Hot Melt Adhesive for Hygiene Products Seller: Foshan Rurga New Material Technology Co. ,Ltd Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ...
LSAW Steel Pipe & Tube
LSAW Steel Pipe & Tube Seller: HEBEI TIRICO PIPELINE CO.,LTD LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ...
Anti-Corrosion Steel Pipe & Tube
Anti-Corrosion Steel Pipe & Tube Seller: HEBEI TIRICO PIPELINE CO.,LTD Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti...