Electrical Insulation Powder Coatings
Feature:
|
Granularity |
100~200μm>=70%
260μm<=0.5% |
External appearance |
flat and smooth, slight orange peel is allowed |
|
Edge coverage rate |
>=30% |
Impact strength |
>=50kg.cm |
|
Adhesion(cross-cut) |
<=2 grade |
Pencil hardness |
>=H |
|
Flexibility |
<=3mm |
Neutral salt spray |
no obvious change within 500h |
|
Volume resistivity |
>=1×104 Ω.cm |
Electric intensity |
>=30kv/mm |
Field of application:
Mainly used for painting the stators and rator core as groove insulation, especially good for those motor rotors of the automobiles, motorcycles and hair dries.
|
Packing |
Double PP bags, N.W 20kg/carton |
|
Shelf life |
12 month within 30℃,avoid direct sunlight |
|
Health and Safety |
Refer to the MSDS. |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Thermosetting Special Powder Coating | I. Product Introduction In today’s world where extreme performance and environmental protection are both highly valued, the thermosetting sp... |
|
|
Powder coating for automobile springs | Product description Powder coating for automobile springs is outdoor pure polyester powder coating with excellent weather resistance and mechanica... |
 |
Tetrafluoroethylene rubber compound | Fluoroelastomer is a copolymer of tetrafluoroethylene and propylene. Fluoroelastomer has unique properties compared to traditional FKM-type fluoroe... |
 |
Flat matte MT-62912367 | Introduction No. MT-629/12367 Color Halogen Surface Flat matte System Super weather-resistant polyester Scope of... |
|
|
Low Cure Powder Coating | Introduction We are a professional powder coating manufacturer specializing in Low Cure Powder Coating designed to deliver excellent finish qualit... |
