MDF (Medium Density Fiberboard) Powder Coating
Product Description
This product is a powder coating suitable for medium density fiberboard substrate (MDF) coating produced by special formula and production process. The coating film has excellent mechanical properties and indoor decorative properties, and can be widely used in surface treatment of modern furniture industry. It is generally not recommended to be used directly for surface coating of various outdoor products.
Application Field
It can be widely used in surface treatment of modern furniture industry.
Product Features
- The powder coating has high utilization rate during construction;
- No three waste problems, in line with environmental protection requirements;
- Compared with traditional spray painting and film pressing process, it has lower cost;
- It has stronger adaptability to product switching than film pressing process, and can adopt large-scale industrial production methods;
- The coating film has excellent physical and chemical properties;
- Different coating film appearance effects can be designed.
Transport packaging
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be avoided from direct sunlight, moisture and heat, and contact with chemicals.
Powder coating
| Specific gravity | 1.15~1.8g/cm° (depending on the color and gloss) |
| Particle size | 100% less than 100 microns (can be adjusted according to the special requirements of the coating) |
| Powder fluidity | 140-150 |
| Construction process | 1. Electrostatic spray gun can be used for coating, and the film thickness is suitable to be controlled at 70-90 microns. (MDF substrate needs to be heated and homogenized in an infrared oven in advance and preheated. The specific heating temperature is determined according to the heat capacity of the MDF substrate.) |
| 2. Curing conditions: 140℃, 5-8 minutes (referring to the surface temperature of the MDF board). The oven can use an ordinary hot air circulation oven or a drying tunnel. If conditions permit, it is best to use an infrared oven to quickly heat and level the newly sprayed coating, and then send it to an ordinary oven for baking and curing. |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Branched Copolyester Powder Coating | 1. Chlorinated Polyether (CPE) Powder Coatings High-Performance Industrial Protection & Insulation As a leading China-based manufacturer, we ... |
 |
Single-Layer Epoxy Anti-Corrosion Powder Coating (External Coating) | Product Introduction: This product is formulated using epoxy resin, functional curing agents, and a meticulous design. It features high reactivity... |
 |
Super weather-resistant polyester powder coating | Product series Surface effects: flat high gloss, flat flat gloss, flat matte, sand grain, wrinkles, etc. Certification: Some products have passed... |
 |
Outdoor leisure metal furniture powder | Brief description Made with saturated polyester resin and curing agent such as TGIC or HAA as the main base material. Features Excellent mechani... |
 |
Conductive Powder Coating | Product Features: Dissipates static electricity to protect the normal operation of low-voltage or micro-electronic components. Prevents the occur... |
Same products
 |
Heat Sealing Sterilization Pouch | Seller: Hopeway AMD | Heat Sealing Sterilization Pouch is designed for secure medical instrument packaging, supporting ... |
 |
Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier | Seller: Trucont LLC | At Trucont LLC, we have ongoing Catalytic converter scrap available for immediate loading and shi... |
 |
Epimedium Extract | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
