Epoxy Anti-Corrosion Powder Coating for Firefighting Steel Pipes
Product Introduction:
This product is formulated using linear phenolic epoxy resin, polyurethane-modified epoxy resin, and advanced curing agents, designed and manufactured based on a new formulation concept. It features high reactivity, strong adhesion, high cross-link density, and excellent resistance to chemicals, solvents, cathodic disbondment, as well as superior flexibility, impact resistance, and high-temperature resistance.
Product Features:
Excellent adhesion to the substrate.
Strong anti-corrosion capability.
Good leveling, high gloss, and dense coating.
Superior high-temperature cathodic disbondment resistance.
Extremely strong flexibility, capable of passing the 4/5 flattening and post-grooving tests.
Good performance in withstanding high and low temperatures.
Strong resistance to boiling water.
Powder Coating Performance Parameters：
| Item | Quality Indicator | Test Method |
|---|---|---|
| Appearance | Uniform color, no lumps | Visual inspection |
| Density (g/cm³) | 1.3-1.7 | GB/T 4472 |
| Volatile Content (%) | ≤ 0.6 | GB/T 6554 |
| Curing Time (s) | 180°C ≤ 5 minutes | SY/T 0315-2005 |
| 230°C ≤ 3 minutes |
Cured Powder Coating Performance Parameters：
| Test Item | Technical Indicator | Test Method |
|---|---|---|
| Appearance | Uniform color, no bubbles, cracks, or pinholes | Visual inspection |
| Adhesion (Grade) | 1-3 | CJ/T 120-2008 |
| Pinholes | No electrical spark generation | GB/T 5135.20-2010 |
| Impact Resistance | No peeling, no cracking | GB/T 5135.20-2010 |
| High-Temperature Resistance (300°C/1h) | Coating shows no detachment, bulging, cracking, peeling, or damage | GB/T 5135.20-2010 |
| Low-Temperature Resistance | Coating shows no detachment or damage, adhesion grade 1-3 | GB/T 5135.20-2010 |
| Pressure Cycling | Coating shows no detachment or damage, adhesion grade 1-3 | GB/T 5135.20-2010 |
| Temperature Cycling | Coating shows no detachment or damage, adhesion grade 1-3 | GB/T 5135.20-2010 |
| Boiling Water Aging | Coating shows no detachment or damage | GB/T 5135.20-2010 |
| Vacuum Resistance | Coating shows no detachment | GB/T 5135.20-2010 |
| Flexibility | Coating shows no detachment or cracking | GB/T 5135.20-2010 |
| Flattening Test | Coating shows no peeling or cracking | GB/T 5135.20-2010 |
Compliance Standards:
GB/T 5135.20-2010; CJ/T 120-2008
Application Fields:
Anti-corrosion coating for internal and external surfaces of water supply pipes used in firefighting.
Application Processes:
Spraying, dip coating, etc.
Precautions:
The steel pipe surface should be free of oil and moisture; the surface treatment quality should reach Sa2 1/2 level (GB/T 8923); the anchor pattern depth should be 50-90 mm; dust and abrasives on the steel pipe surface should be blown clean. Preheating temperature should be controlled between 180-240°C.
The product should be stored in a well-ventilated, dry indoor environment with a temperature below 30°C, away from heat sources, corrosive chemicals, and chemical solvents, and protected from strong light exposure. The stacking height should not exceed four layers. Avoid long-term pressure and ensure the packaging box is sealed to prevent caking and moisture, which can affect fluidization performance.
To ensure thorough curing of the epoxy coating and better anti-corrosion performance, it is recommended to preheat the steel pipe surface to above 200°C to improve the curing completion rate.
Send product request
Other supplier products
 |
Polyurethane Powder Coatings | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance -Good transfer print ability -Better performance... |
 |
Outdoor powder coatings | Introduction Outdoor powder coatings are advanced protective and decorative coatings designed for long-lasting performance. Applied as a dry powde... |
|
|
Powder coatings for Automotive trim parts MT-A2201 /MT-YZ108GF | Product Description MT- A2201 clearcoats can be used for pillars and appliqués, roof racks, grille guards, bumpers, and mirror housings, al... |
 |
Thermosetting Special Powder Coating | I. Product Introduction In today’s world where extreme performance and environmental protection are both highly valued, the thermosetting sp... |
 |
Imitation Anodizing Coating Series | Key Features & Specifications FeatureSpecification / Benefit Anodizing-Like Matte Finish Replicates thesleek, low-gloss aesthetic ... |
Same products
 |
Heat Sealing Sterilization Pouch | Seller: Hopeway AMD | Heat Sealing Sterilization Pouch is designed for secure medical instrument packaging, supporting ... |
 |
Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier | Seller: Trucont LLC | At Trucont LLC, we have ongoing Catalytic converter scrap available for immediate loading and shi... |
 |
Epimedium Extract | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
