Epoxy Anti-Corrosion Dual-Resistance Powder Coating for Coal Mines
Product Introduction:
This product is formulated using phenolic epoxy resin and incorporates modified conductive polymers and conductive materials, combining the advantages of intrinsic and doped conductivity. It is specifically designed for conductive heavy-duty anti-corrosion powder coatings. The surface resistivity of the coating can reach below 10⁵ Ω, effectively eliminating static electricity accumulation in gas drainage pipes and preventing static sparks, thereby enhancing safety. The coating features high reactivity, strong adhesion, high cross-link density, and excellent resistance to chemicals, solvents, cathodic disbondment, as well as superior flexibility and impact resistance.
Product Usage:
Special anti-static and anti-corrosion coating for gas ventilation and drainage pipes in coal mines.
Product Features:
- Excellent adhesion to the substrate.
- First application of a new material combining intrinsic and doped conductivity.
- Good conductivity of the coating, with surface resistivity reaching 10⁵ Ω, effectively eliminating surface charge accumulation.
- Superior high-temperature cathodic disbondment resistance.
- Low melting temperature, high reactivity, high curing completion rate, and good mechanical properties.
- Contains composite flame retardants, providing certain flame-retardant effects.
Powder Performance:
| Property | Specification | Notes |
|---|---|---|
| Adhesion | Excellent | |
| Conductivity | Surface resistivity below 10⁵ Ω | |
| Cathodic Disbondment Resistance | Superior at high temperatures | |
| Flexibility | Extremely strong, passes 4/5 flattening and post-grooving tests | |
| Temperature Resistance | Good performance in high and low temperatures | |
| Flame Retardancy | Contains composite flame retardants |
Curing Conditions:
| Property | Specification | Notes |
|---|---|---|
| Temperature | Referenced to workpiece temperature | Deviations may affect performance |
| Heating Method | Medium-frequency heating or other heating methods |
Application Parameters:
| Parameter | Specification | Notes |
|---|---|---|
| Applicable Equipment | Frictional charging spray, corona electrostatic spray, dip coating, roll coating | |
| Film Thickness | 250-450um | Adjustable according to workpiece requirements |
Health and Safety:
| Property | Specification | Notes |
|---|---|---|
| Toxicity | Non-toxic | |
| Flammability | Non-flammable | |
| Regulation | GB15607-1995 | Coating operation safety regulations |
Precautions:
| Item | Specification | Notes |
|---|---|---|
| Outdoor Use | Not recommended | May cause fading and chalking |
| Surface Preparation | Oil-free, water-free, surface treatment to Sa21/2 level (GB/T8923), anchor pattern depth 40-100um, clean surface from dust and abrasives | |
| Preheating | Temperature controlled between 180-250°C, not exceeding 250°C | |
| Storage | Ventilated, dry, below 30°C, away from heat sources, corrosive chemicals, and solvents, avoid strong light, maximum stack height 5 layers, avoid long-term pressure, keep packaging sealed | |
| Curing Temperature | Preheat steel pipe surface to above 200°C for better curing completion rate |
Compliance Standards:
MT 181-88 “Safety Performance Testing Specifications for Plastic Pipes Used in Coal Mines”
Send product request
Other supplier products
 |
Propylene glycol phenyl ether | Introduction： Propylene glycol phenyl ether can be used as an excellent high-boiling point organic solvent or modification agent to replace isopho... |
 |
Super-hardness baking porcelain powder coating | Properties of Porcelain Powder Coating ProjectsPorcelain steel plateWater-painted porcelain aluminum platePowdered porcelain aluminum plate ... |
 |
Thin Coating Powder Series | Introduction Key Features & Specifications FeatureSpecification / Benefit Ultra-Thin Film Formation Achieves30–50μm film... |
 |
Phenolic Cured Epoxy Powder Coating | Engineered Surface Solutions for Every Application Powder coatings are formulated with different resin bases to meet diverse performance, aestheti... |
 |
Talc Powder MT-TYT-888 | Product Introduction MT-TYT-888 is a high-grade talc powder produced by our company using internationally advanced airflow impact grinding technol... |
Same products
 |
Epimedium Extract | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
 |
Pomegranate Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance... |
 |
Orange Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Orange PowderLatin Name: Citrus sinensisUsed Part: Fruit juiceAppearance: Light yel... |
