Anti-graffiti powder coating
Brief description
This series of products is based on saturated hydrocarbon polyester resin and isocyanate curing agent as the main base material, with the following excellent properties: super weather resistance, high corrosion resistance, high resistance to chemical solvents, high scratch resistance, thermosetting polyurethane powder coating.
Coating properties
| Mechanical properties |
Impact |
GB/T1732-93 |
50kg*cm |
| Bending |
GB/T6742-86 |
Φ2mm |
| Cupping |
GB/T9286-88 |
>6mm |
| Adhesion |
GB/T9286-88 |
Grade 0 |
| Hardness |
GB/T6739-86 |
≥3H |
| Boiled |
in 96-100C distilled water for 2 hours |
No discoloration or blistering |
| Corrosion resistance |
Acid resistance |
5%H2SO4 |
1 year |
No discoloration or blistering |
| 48%HCL |
1 month |
| 5%HAC |
1year |
| 5%H3PO4 |
1year |
| Alkali resistance |
5%NaOH |
30 days |
No discoloration or blistering |
| 5%NaCO3 |
|
| Solvent resistance |
Acetone |
Brush 50 times |
No discoloration or blistering |
| Xylene |
| Methyl ethyl ketone |
| Gasoline |
| Alcohol |
| Ethyl acetate |
| Salt spray resistance |
GB1771-91 |
1000 hours |
No change in coating film, single-sided corrosion at the cross section <2mm |
| Heat and humidity resistance |
GB1740-79 |
1000hours |
Slight gloss loss of film, <1 level |
| Weather resistance |
ASTM G154 QUV |
1000hours |
Gloss retention rate ≥80% |
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Other supplier products
|
|
Thermosetting flat powder coating |
Product Introduction
MT thermosetting flat powder coating adopts advanced polymer formula technology to form a dense and smooth coating through hi... |
|
|
Powder coating for elevators |
Product description
Powder coating for elevators has excellent decorative appearance, and the coating film has excellent corrosion resistance, tou... |
|
|
Powder coating for aluminum profiles |
Product description
This series of products is based on saturated hydroxyl polyester resin and TGIC curing agent as the main base materials, and i... |
|
|
Powder coating for fitness equipment |
Product description
Powder coating for fitness equipment has an excellent decorative appearance, and the coating film has excellent corrosion resi... |
|
|
Gray Powder Coating |
We manufacture and export a full range of gray tone powder coatings, available in RAL, Pantone, or custom shades – shipped globally from Chin... |
All supplier products
Same products
