Polyester based powder coating MT-JA020G White
Product Description
MT-JA020G is a polyester based powder coating, formulated using TGIC and is designed for exterior exposure offering excellent light and weather resistance from a single coat finish.
Powder Properties
| Chemical type | Polyester TGIC |
| Appearance | Smooth Gloss |
| Particle Size | Suitable for electrostatic spray |
| Specific gravity | 1.63 ± 0.05 g/cm³ |
| Film Thickness | 75 – 100 microns |
| Coverage | 8.3 m2/kg @ 75 microns |
| Storage | Dry cool conditions below 25°C (open boxes must be resealed) |
| Shelf life | 12 months |
| Stoving schedule
(object temperature) |
25 – 30 minutes @ 160°C
20 – 25 minutes @ 175°C 15 – 20 minutes @ 190°C 12 – 15 minutes @ 205°C |
Test Conditions
The results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Substrate | Cold Rolled Steel |
| Pretreatment | B1000 Iron Phosphate |
| Film Thickness | 75 – 100 microns |
| Stoving Schedule | 15 minutes at 190°C |
Mechanical Tests
| test | results | |
| Flexibility | ASTM D522 | 3mm |
| Adhesion | ASTM D3359 | 100% |
| Impact (direct | ASTM D2794 | 120kgcm |
| Gloss(@60°） | ISO 2813 | >85% |
| Hardness (gouge) | ASTM D3363 | 6H |
| Hardness (scratch) | ASTM D3363 | HB |
| Reflectance Class | DIN EN 16268 | B |
Pre-treatment
Steel surfaces to be coated must be clean and free from grease, mill scale and rust. For maximum protection, it is essential to pre-treat components prior to the application of MT-JA020G. Iron phosphate and zinc phosphate pre-treatment of ferrous substrates improve corrosion resistance. Aluminium substrates may require a chromate conversion coating.
Application
MT-JA020G can be applied using manual or automatic electrostatic spray equipment. It is recommended, that for consistent application and appearance, the product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Red Series Powder Coating | Introduction We are a China-based manufacturer specializing in the production and export of a wide range of red series powder coatings, offering v... |
|
|
Polyurethane primer STD-927 | Product Description The one-component primer can improve the surface condition of the base layer, making it flatter and smoother, providing a good... |
 |
Thermosetting flat powder coating | Product Introduction MT thermosetting flat powder coating adopts advanced polymer formula technology to form a dense and smooth coating through hi... |
|
|
Specialty Powder Coatings for the Automotive Sector | Introduction Product SegmentationApplication Fields Weather-Resistant Decorative Powder for Vehicle Exterior Whole vehicle coatings fo... |
 |
Hydroxylated acrylic resin STD-1332A | PRODUCT DATA APPEARANCE Appearance: Crystal clear SOLVENT Solvent: TOL/BAC NON-VOLATILE MATTER(%) Solids: 50±2% ACI... |
