Polyester based powder coating MT-JA010G White
Product Description
MT-JA010G is a polyester based powder coating, formulated using TGIC and is designed for exterior exposure offering excellent light and weather resistance from a single coat finish. MT-JA010G is part of the MT range of powder coatings with high total reflectance, designed specifically for the lighting market.
Powder Properties
| Chemical type | Polyester TGIC |
| Appearance | Smooth Gloss |
| Particle Size | Suitable for electrostatic spray |
| Specific gravity | 1.67 ± 0.05 g/cm³ |
| Film Thickness | 75 – 100 microns |
| Coverage | 8.0 m2/kg @75 microns |
| Storage | Dry cool conditions below 25°C (open boxes must be resealed) |
| Shelf life | 12 months |
| Stoving schedule
(object temperature) |
25 – 20 minutes @ 160°C
12 – 15 minutes @ 175°C 10 – 12 minutes @ 190°C 8 – 10 minutes @ 205°C |
Test Conditions
The results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Substrate | Cold Rolled Steel |
| Pretreatment | B1000 Iron Phosphate |
| Film Thickness | 75 – 100 microns |
| Stoving Schedule | 10 minutes at 190°C |
Mechanical Tests
| test | results | |
| Adhesion | ASTM D3359 | 100% |
| Impact (direct | ASTM D2794 | 120kgcm |
| Gloss(@60°） | ISO 2813 | >90 |
| Hardness (gouge) | ASTM D3363 | 6H |
| Hardness (scratch) | ASTM D3363 | 2H |
| Reflectance Class | DIN EN 16268 | A |
Pre-treatment
Steel surfaces to be coated must be clean and free from grease, mill scale and rust. For maximum protection, it is essential to pre-treat components prior to the application of MT-JA010G. Iron phosphate and zinc phosphate pre-treatment of ferrous substrates improve corrosion resistance. Aluminium substrates may require a chromate conversion coating.
Application
MT-JA010G can be applied using manual or automatic electrostatic spray equipment. It is recommended, that for consistent application and appearance, the product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Chrome-silver-effect polyurethane powder coatings MT-200 Cr | Product description MT-200 Cr is a series of polyurethane-based powder coatings designed for the exterior environment offering excellent corrosion... |
 |
Antistatic powder coating/ | Introduction: Made of antistatic materials, suitable for indoor and outdoor environments Features: The volume resistivity of the coating is as l... |
 |
Light blue high gloss powder coating-coating powder manufacturer | Introduction High gloss powder coating is a kind of excellent performance coating, with the following characteristics: – Appearance perform... |
 |
Metallic sand texture matte MT-049/7C130 | Introduction No. MT-049/7C130 Color Gray Surface Metallic sand texture matte System Polyester Scope of applicati... |
 |
Epoxy Anti-Corrosion Powder Coating for Pipeline Internal Coating | Product Introduction:This product is formulated using special epoxy resin and functional curing agents. It features high reactivity, strong adhesio... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
