High durability powder coatings MT-800 AM
Product Description
MT-800 AM is a series of high durability powder coatings designed for exterior exposure. Tested against the most severe specifications MT-800 gives significantly improved gloss retention and resistance to colour change. MT-800 AM powders are available in a wide range of colours and gloss levels and can be custom matched to the user’s requirements.MT-800 AM is a high-quality powder coating designed to meet decorative and functional demands of your specifications. Test results have proven reduction of bacteria and mold up to 99.9%.
Powder Properties
| Chemical Type | PolyesterTGIC |
| Particle Size | Suitable for electrostatic spray |
| Specific Gravity | 1.2-1.7 g/cm³ depending on colour and effect |
| Storage | Dry cool conditions below 25°C |
| Shelf Life | 12 months |
| Stoving Conditions
(at object temperature) |
15 minutes at 190°C
10 minutes at 200°C 8 minutes at 210°C |
Mechanical Tests
| Adhesion (2mm Crosshatch) | ISO2409 | Gt 0 |
| Erichsen Cupping | ISO1520 | Depends on shade |
| Hardness (4000gms) | ISO 1518 | Pass – no penetration to substrate |
| Impact | BS6496 | Depends on shade |
| Flexibility (Conical Mandrel) | ISO6860 | Depends on shade |
Pre-treatment
For maximum protection it is essential to pretreat components for exterior use prior to the application of MT-800. Aluminium components should receive a full multi-stage chromate conversion coating to clean and condition the substrate. Detailed advice should be sought from the pretreatment supplier. Galvanised steel also requires multi-stage pretreatment using either zinc phosphate or chromate conversion. Degassing of galvanised steel prior to powder application is considered mandatory – follow the procedural advice of the pretreatment supplier. MT-800 products may also be used on other substrates (eg. mild steel fabrications) for internal applications; nevertheless zinc phosphate pretreatment is regarded as essential.
Application
MT-800 AM powders can be applied by manual or automatic electrostatic spray equipment. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Bridge powder coating | Characteristics of powder coatings 1. The coating film is flat and smooth; 2. The paint film has good physical and mechanical properties, especia... |
 |
Gray Color Hammer Powder Coating | Basic Info. iteminformation Model NO. Hammer Tone Finish Powder Coating Method Spray Main Raw Material Polyester Resin ... |
 |
Powder Coating for Electrostatic Spray Application on Cold Surfaces | Product Description MT R4-ES HJ601R is a high quality thermosetting epoxy powder coating for the corrosion protection of valves and fittings, manu... |
 |
Flat surface MT-049/14662 | Introduction No. MT-049/14662 Color Yulong (white) Surface Flat surface System Polyester Scope of application U... |
 |
Bisphenol F Epoxy Powder Coating | Product Overview Bisphenol F Epoxy Powder Coating is an advanced thermoset coating system developed for indoor metal components that require enhan... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
