Insulating Powder Coating/powder coating with multilingual support
Product Features:
High electrical insulation properties, with a large resistance coefficient and low dielectric constant, meeting the requirements for general enameled wire and electronic component encapsulation.
Capable of rapid low-temperature curing and can also utilize residual heat curing (for heat-resistant components).
Excellent adhesion and flexibility, with good moisture resistance, anti-aging properties, thermal stability, flame retardancy, and adjustable color options.
Edge coverage greater than 30%, with a breakdown voltage greater than 40KV/mm.
Resistant to heat, wear, water, acids, alkalis, and salts; the coating is continuous and smooth, with a very dense texture.
For large and heavy components, fluidized bed preheating and residual heat curing are recommended.
Product Parameters
| Item | Quality Indicator | Test Method |
|---|---|---|
| Appearance | Uniform color, loose without lumps, dry powder flowability 120-140 mm | Visual inspection |
| Color | As per customer requirements | Combination of colorimeter and visual inspection |
| Adhesion | Cross-cut test (ISO 2409. GB/T 9286-1998) | 0 level, excellent |
| Impact Resistance | Impact tester (drop weight method) (ISO 6272. GB/T 1732-1993) | Good performance at 50 kg.cm |
| Flexibility | Bending test instrument (ISO 1519. GB 6742-1986) | 3 mm, excellent flexibility |
| Cupping Test | ISO 1520. GB/T 9753-1993 | Pass at 8 mm |
| Surface Hardness | Pencil hardness (Mitsubishi pencil) (ASTM D3363. GB/T 6739-1996) | 1H |
| Electrical Insulation | Breakdown voltage greater than 40KV/mm | Excellent |
| Humidity Resistance | ISO 6270. GB/T 1740-1979 | Over 1000 hours |
| Salt Spray Test | ISO 7253. GB/T 1771-1991 | Over 1000 hours |
Application Fields:
Motor casings
Motor stators and rotors
Instruments
Small transformers
Electronic components
Send product request
Other supplier products
 |
Trixylene phosphate (TXP) | Product Details Tri(xylene) phosphate (TXP) Molecular formula: C24H27O4P Relative molecular mass: 410.44 ... |
 |
Polyester based powder coating MT-JA000G White | Product Description MT-JA000G is a polyester based powder coating, formulated using TGIC and is designed for exterior exposure offering excellent ... |
 |
Anti-graffiti powder coating | Brief description This series of products is based on saturated hydrocarbon polyester resin and isocyanate curing agent as the main base material,... |
 |
Metallic sand texture matte MT-049/7C130 | Introduction No. MT-049/7C130 Color Gray Surface Metallic sand texture matte System Polyester Scope of applicati... |
 |
Polyester/TGIC powder coating series | Made of polyester resin and TGIC curing agent as the main raw materials. Features: —Good adhesion, excellent mechanical properties, tough c... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
