Impact Bed Bar
1.UHMW,UHMW’s molecular weight ranges from 3.1 million to 9.2 million for your choice2.Standard size:1x3m, 2x3m, 1.5x1.5mThickness: 3mm to 500mmWe can manufacture according to your requirements too.3.Features of our impact bed bar1.Impact bars and with the press of conveyor belt effectively prevents the contact of the damage.2.belt evenly in the blanking mouth, greatly reduce the daily repair and maintenance costs.3.effective eliminate non-uniform stress because of conveyor belt to splash and materials.4.high density polyethylene smooth surface so that the conveyor belt running to minimize friction.5.the surface layer of polyethylene arc design, to ensure the smooth running of the conveyor belt slippery6.high elastic special rubber layer to maximize impact absorption material.7.Each part of bar between thermal vulcanization technology connected compact.8.Bottom of steel structure design makes the disassembling become conveniently.4.UsageImpact bar is used in the loading area of the belt conveyor to replace the traditional cushion rollers. It’s designed to absorb impact loading which will dramatically reduce shock and stress loading to the structure.The use of Impact Beds assists the elimination of roller and frame damage in the loading area and effectively reduces belt damage and shock transfer to the conveyor structure. The Bed’s Impact Bars are used to provide a low friction sliding surface between the impact bed and the rubber belt travelling over it. Furthermore, the Impact Bar's rubber backing is designed to absorb impact loads of material on the Bed.
Other supplier products
|
|
Outrigger Pads |
1.UHMW,UHMW’s molecular weight ranges from 3.1 million to 9.2 million for your choice2.Standard size:1x3m, 2x3m, 1.5x1.5mThickness: 3mm to 500mmWe ... |
|
|
Corrosion Resisitance Board |
1.UHMW,UHMW’s molecular weight ranges from 3.1 million to 9.2 million for your choice2.Standard size:1x3m, 2x3m, 1.5x1.5mThickness: 3mm to 500mmWe ... |
|
|
Hdpe Cutting Board |
High Density Polyethylene Cutting BoardFDA APPROVED MATERIAL FOR CUTTING BOARDSHigh Density Polyethylene (HDPE) cutting boards are engineered for d... |
|
|
UV Resistance Board |
1.UHMW,UHMW’s molecular weight ranges from 3.1 million to 9.2 million for your choice2.Standard size:1x3m, 2x3m, 1.5x1.5mThickness: 3mm to 500mmWe ... |
|
|
Cable Clamp |
uhmwpe cable clamp(1) uhmwpe parts characters:1. High-wear resistanceseven times wear resistance than steel, four times than PTFE.2. High impact re... |
All supplier products
Same products
