Smooth block Wax feeling of silicone emulsion A-100

• 

Basic Characteristics
Appearance: brown liquid
Ionic nature: slight cationic / non ionic
Solubility: can be dissolved in water at any ratio (after adjusting with acetic acid ).
Properties And Advantages
☆ This product is a high efficient smooth softener, less dosage, especially suitable for polyester fiber, cellulose fiber, nylon, protein fiber and its blends handle feeling treatment;
☆ Good handle feeling, soft, smooth, fluffy
☆ Suitable for continuous process techniques, will not stick roll;
☆ Does not contain APEO
Usages
☆This product is of high concentration high efficient softening agent, used after diluting 10 times (1:10) , without emulsifiers, only need to add acetic acid 2% (add 2% of the amount of A-100), stirring evenly, and then slowly add the remaining water, emulsion is colorless transparent liquid.
☆After diluting, the product can be used by exhausting and continuous padding
Exhausting : 2—4%（OWf）,30—40°C/15--30min;
Bath ratio：20--40；
Padding : 10—40g/l
Package And Storage
50kgs or 120kgs per plastic drum. Should be stored in a cool ventilated warehouse, to avoid sun exposure, the storage period is two years.

Other supplier products

	Textile-specific anion finishing agent	Basic characteristics Appearance:Colorless transparent thick liquid Ionic nature: slight cationic / non ionic Solubility: can be dissolved in any p...
	Antistantie finishing agent anti-wrinkle 6602F	The multi-functional finishing agent is mixture of polyester, polyether compound and hydrophilic polymer. Applied to polyester fabric finishing, ex...
	cheap textile softener silicone fluid for textile finishing auxiliary agenT	Main component Special nonionic polymer composite Techincal indicator Appearance: colorless transparent liquid Solid content (%): 15.0-17.0 pH (1% ...
	Super soft and slippery hydrophilic silicone softening agent used for the continuous processing	Product introduction Waxy silicone emulsion M-200A is emulsified by M200. M-200 is composed of Polymerization of epoxy silicone oil and ammonia eth...
	Smooth block Wax feeling of silicone emulsion A-100	Basic Characteristics Appearance: brown liquid Ionic nature: slight cationic / non ionic Solubility: can be dissolved in water at any ratio (after ...

Same products

	OSi PEMS 57 CAS 70914-12-4	Seller: OSi Holding Limited	Other descriptions: Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, ethers with polyethylene...
	LC12 Two-Component Solvent Free Silicone Conformal Coating	Seller: Nanjing Silfluo New Material Co., Ltd.	Conformal Coating, also called silicone coating pcbelectronic circuit board protection oil, coati...
	LA-17 Polyether Modified Short Chain Polysiloxane	Seller: Nanjing Silfluo New Material Co., Ltd.	Polyether modified trisiloxaneshort chain polysiloxane. Compared to trisiloxane surfactant,it has...
	LA-14 A Modified Trisiloxane and an Silicone Surfactant	Seller: Nanjing Silfluo New Material Co., Ltd.	(It is a substitution of Silwet ECOand Xiameter(R) OFX-0309) A modified Trisiloxane and an silico...
	LA-11 A Modified Trisiloxane and an Silicone Surfactant	Seller: Nanjing Silfluo New Material Co., Ltd.	(It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with supe...