POWSIL-59110 Super Soft Silicone Softener
POWSIL-59110 is a super soft textile softener.It contains a revolutionary & new generation of silicone molecule that delivers a voluminous and silky hand feel.
Furthermore it provides sio2 hydrophilic nature to most types of softener in textilefibers or fabrics at a reduced use level than other silicone softeners. It is very stable in an ordinary textile finish process without causing oil-spots on fabric.
Technical Data
|
Physical Form |
Liquid state |
|
Appearance |
Transparent, light yellowish |
|
Solid Contents (wt%) |
~50 |
|
Viscosity (25°C, cps) |
＜1,500 |
|
pH (25°C) (1% in water) |
|
|
Diluents |
Water |
|
Ionic |
Slightly cationic |
Application
POWSIL-59110 silicone fabric softener can be used as received or pre-diluted with water before applying. It is a MUST to stir the contents of POWSIL-59110 so that it is well homogenized in the drum before use.
The optimum treatments such as dosages are dependent on the required softness of the fabric and yarn after finishing. Typical applications are recommended as follows:
Pad-dry-cure process:
Dosage: 5~10g/l for light fabric or 10~20g/l for heavy fabric
pH: 5.0 ~ 7.0
Dry/Cure: 120 ~ 170 ºC for 1~3 min
Exhaustion process:
Dosage: 0.5~ 1.0% on the weight of fabric
Liquor ratio: 1/10 ~ 1/20
pH: 5.0 ~ 7.0
Time: 20 ~ 30 min
Drying: 100 ~ 130 ºC for 3~5 min
Garment washing process:
Dosage: 0.5~1.0% on the weight of garment
Duration: 20 ~ 30 min
Drying: 100 ~ 130 ºC for 3~5 min
Guides of Stripping:
POWSIL-59110 can be stripped off fabric. The stripping formulation is as follows:
NaOH: 5 g/l
LABS(30%) : 2-5%
Add water and NaOH onto fabric tank and then heat to 100°C for 60 min. Then rinse fabric with acidic water and then pure water.
Packing and Storage
The product for better silicone Chinafabric is sensitive to temperature below -10°C and above 60°C. When it is separated, stir the contents well homogenized or add 2-5% of 20% acetic acid aqueous solution and stir for 30 min. If the product is frozen, thaw it at warm condition and stir after thawed. The container should be tightly sealed when not in use.
To ensure the product quality is maintained, the product should not be exposed to too hot or too cold condition. It is stable for 12 months when properly stored at 25°C. It is a MUST to stir the contents of POWSIL-59110 so that it is well homogenized in the drum before use.
We have types of Silicone Fluidfor sale , if you have needs, contact us.
Send product request
Other supplier products
 |
SiSiB® FS2110 Hydrophobic Fumed Silica | Good thickening and thixotropy. Good anti-sagging properties and excellent stability in epoxy resin. Excellent reinforcing properties in sili... |
 |
Silicone Resins | Since our establishment as a silicone softenersmanufacturer in 1989, silicone has been our core business, especially custom food and medical grade ... |
 |
SiSiB® PC1118 | Bis 3 trimethoxysilyl propyl amine SiSiB® PC1118 is a secondary aminofunctional silane possessing two symmetric silicon atoms. SiSiB® PC11... |
 |
*571582630Si* | SiSiB® PC19417 is a solution of an ultra-high viscosity dimethiconol fluid in a blend of cyclotetrasiloxane and cyclopentasiloxane, with colorl... |
 |
SiSiB® PC5424 Ethylpolysilicate 40 | SiSiB® PC5424 EthylSilicate 40 SiSiB® PC5424 is a hydrolyzed and oligomerized form of ethyl silicate. It is a mixture of monomers, dimers... |
Same products
 |
LC12 Two-Component Solvent Free Silicone Conformal Coating | Seller: Nanjing Silfluo New Material Co., Ltd. | Conformal Coating, also called silicone coating pcbelectronic circuit board protection oil, coati... |
 |
LA-17 Polyether Modified Short Chain Polysiloxane | Seller: Nanjing Silfluo New Material Co., Ltd. | Polyether modified trisiloxaneshort chain polysiloxane. Compared to trisiloxane surfactant,it has... |
 |
LA-14 A Modified Trisiloxane and an Silicone Surfactant | Seller: Nanjing Silfluo New Material Co., Ltd. | (It is a substitution of Silwet ECOand Xiameter(R) OFX-0309) A modified Trisiloxane and an silico... |
 |
LA-11 A Modified Trisiloxane and an Silicone Surfactant | Seller: Nanjing Silfluo New Material Co., Ltd. | (It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with supe... |
 |
KSS Potassium Diphenylsulfone Sulfonate | Seller: Nanjing Silfluo New Material Co., Ltd. | KSS is a high heat stable PC additive. Equivalents to FR2025, EF-42. Description of KSS Potass... |
