F605-Epoxy Primer
1、F605-Epoxy Primer
Automotive Paints Supplier
Product Name/Model:F605-Epoxy Primer
Characteristic: Good fillibility, easy sanding, give excellent rust proofing for bare metal,
goodadhesion power to steel, aluminium, galvanized steel and stainless steel, excellent chemicalcorrosion resistance and rust resistance.
|
Substrates |
Dried and sanded existing finishes, steel, aluminium, stainless steel, galvanizedsteel, glass fiber reinforced plastic. |
||
|
SurfaceCleaning |
Wash by warm soap, remove wax, silicon and other contaminations withdegreaser, sandingwith P800-P1000, wash with clean water then keep dry;again with degreaser. |
||
|
Mixing Ratio |
F605 Epoxy Primer |
MSH105 EpoxyHardener |
MSD-63EpoxyThinner |
|
4 |
1 |
1~2 |
|
|
＜30℃ |
F605 Epoxy Primer |
MSH105 EpoxyHardener |
MSD-63 EpoxyThinner |
|
SprayViscosity |
16-19s to drop off, in 4# viscosity cupat 25°C, |
||
|
Pot-life |
At 20°C, 3 hours with hardener. |
||
|
ReTreatment |
Sanded with P600orP800 sand paper, do following construction after drying |
||
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm 2Suction Feed: 1.4-1.6mm 4-5kg/cm 2 |
||
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 25-35um.Flash-Off Time: At 25°C, 5-10minutes between two coats, it depends ontemperature and paint film. |
||
|
Drying Time |
|
||
|
Shelf Life |
2 years in original sealed can, cool and dry place at 25℃. |
||
|
Package |
1L×12or3.75L×4 |
||
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult to becleaned after dry.
Send product request
Other supplier products
 |
BYTC15 Extra Fast Clear Coat. | BYTC15 Extra Fast Clear Coat. Auto Coatings Product Name/Model：BYTC15 Extra Fast Clear Coat. Characteristic: Extra fast drying clear coate, high g... |
 |
MSD-0930 2K Binder | MSD-0930 2K Binder Automotive Refinish Paint Product Name/Model:MSD-0930 2K Binder Characteristic:Resin solution used as additive for spraying M... |
 |
BM1K Silver Colors | BM1K Silver Colors BOYET Series Product Name/Model:BM1K Silver Colors Characteristic:BM1K Silver Colorwith excellent leveling property,easyconst... |
 |
BYT 2K Series Hardener | BYT 2K Series Hardener Automotive Refinish Supplier Product Name/Model：BYT 2K Series Hardener Characteristic: A series of yellow resistant har... |
 |
DG2K-Solid Colors | DG2K-Solid Colors Auto Refinish Paint Product Name/Model:DG2K-Solid Colors Characteristic:DG2K Solid Colors, high gloss and build, good performa... |
Same products
 |
Fast Dry Alkyd Antirust Primer (Iron Red, Gray) | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | The fast-drying alkyd anti-rust paint is composed of alkyd resin and anti-rust pigments. Its surf... |
 |
Exterior Wall Paint | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Weather Resistant Acrylic Exterior Latex Wall Paint is a premium quality, water based 100% acryli... |
 |
DRINKING WATER TANK PAINT | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Before the 1950s, water tank inside paint on ships worldwide were protected by cement slurry. It ... |
 |
CHEMICAL PLANT PAINT | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | The cooling tower is a large-scale reinforced concrete structure, which is mainly composed of a c... |
 |
CAUSES OF BUBBLES IN EPOXY ZINC-RICH PRIMER COATING | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Epoxy zinc primer paintis widely used in industrial anti-corrosion and has excellent corrosion re... |
