Hollow & Bushing Insulator
We offer different kinds of Hollow & Bushing Insulator for Substation, such as Circuit Breaker (CB), GIS, Post Insulator, Disconnector, Potential Transformer (PT), Surge Arrester, etc.
Contact us get more details about Hollow & Bushing Insulator, such as TDS, Application Method, OEM etc.
We can supply different type ofceramic transformer insulator,Hollow Core InsulatorsandBushing Insulator, also customer required.
Background technique of Hollow & Bushing Insulator
Arcing, corona, etc. occur in the device or the end of the hollow core composite sleeve, and the high temperature generated directly acts on the inner wall of the epoxy layer. Or the plasma generated by the arc and the corrosive gas generated by the decomposition of SF6 in the circuit breaker may impinge on the inner wall of the exposed epoxy layer. Polyethylene oxide itself has high temperature ablation resistance, arc resistance and corona resistance, and may cause severe surface ablation and leakage. Therefore, it is necessary to improve the arc resistance of the Hollow & Bushing Insulator.
In the existing science and technology, the fluoroplastic tube is sheathed in the polyethylene oxide/glass fiber composite pipe, thereby utilizing the arc resistance of the fluoroplastic to prevent arc, corona and the like from damaging the inner wall of the hollow composite pipe. However, in this way, its flexibility is poor, the pipe wall is thick, the production is difficult, and the cost is high.
Introduction of Hollow Core Insulators:
Hollow & Bushing Insulator plays an important role in insulation, support, etc. in outdoor power stations, substation and electrical equipment, or as a component of electrical equipment for power equipment. It is usually made of glass fiber hollow-wound tube, upper and lower flanges and silicone rubber shed, which provides support and insulation for wires and electrical equipment, or acts as external insulation for electric equipment, bearing external forces such as bending and stretching.
Structure of Hollow & Bushing Insulator:
The Hollow & Bushing Insulator consists of an insulated mandrel inner cylinder, a tip flange, and a silicone rubber umbrella sleeve. The silicone rubber umbrella sleeve is formed by connecting two or more silicone rubber umbrella sleeve segments, and the connection structure between the adjacent two silicone rubber umbrella sleeve segments is a stepped lap joint structure, which increases the lap joint area. When the silicone rubber umbrella sleeve is subjected to the axial tensile force, the joint strength between the two mold umbrella sleeves is strengthened, the electrical performance of the hollow composite insulator is ensured, and the service life is prolonged.
Send product request
Other supplier products
 |
Electric Cleaning Agent | Electric Cleaning Agent is mainly used for eradicating dirt, dust, and contaminations on the power equipment surface especially clean those which s... |
 |
Instructions of Epoxy Zinc-Rich Primer | It is two components epoxy zinc-rich primer heavy corrosion by zinc primer paint, epoxy resin and other components. On steel surface treated to for... |
 |
Epoxy Zinc-Rich Primer | Fujian RuiSenNew Materials Co., Ltd. was established in 2007, located in Fujian Province, China. RuiSen is the largest manufacturer of RTV Silicone... |
 |
High Voltage Insulator Coating Series | High Voltage Insulator Coating (HVIC) is used on excessive voltage insulators to forestall flashover and arcing, particular in severely contaminate... |
 |
Composite Insulator | We offer different kinds of composite insulator for substation. Contact us get more details about composite insulator, such as TDS, Application Met... |
Same products
 |
Polysiloxane Paint | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Polysiloxane painthas excellent durability, color retention and chalking resistance, low VOC, no ... |
 |
Non-Toxic Epoxy Anticorrosive Paint | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Nontoxic EpoxyAnticorrosive Paint is a two-component epoxy anticorrosive paint,and the product me... |
 |
Nano non-stick pan ceramic coating KJ06 | Seller: Hangzhou Jiupeng New Material Co., Ltd | The non-stick coatings produced by our company have the advantages of good thermal stability, goo... |
 |
Three-proof finishing agent CY-F02 | Seller: Hangzhou Jiupeng New Material Co., Ltd | Nano three-proof finishing agent is prepared by using the properties of nano-materials and has st... |
 |
Anti-corrosion coating Reactor coating CY-L09 | Seller: Hangzhou Jiupeng New Material Co., Ltd | Acid and alkali resistant nano ceramic coating is a new type of acid and alkali resistant coating... |
