MDF (Medium Density Fiberboard) Powder Coating
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Description
This product is a powder coating suitable for medium density fiberboard substrate (MDF) coating produced by special formula and production process. The coating film has excellent mechanical properties and indoor decorative properties, and can be widely used in surface treatment of modern furniture industry. It is generally not recommended to be used directly for surface coating of various outdoor products.
Application Field
It can be widely used in surface treatment of modern furniture industry.
Product Features
The powder coating has high utilization rate during construction;
No three waste problems, in line with environmental protection requirements;
Compared with traditional spray painting and film pressing process, it has lower cost;
It has stronger adaptability to product switching than film pressing process, and can adopt large-scale industrial production methods;
The coating film has excellent physical and chemical properties;
Different coating film appearance effects can be designed.
Transport packaging
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be avoided from direct sunlight, moisture and heat, and contact with chemicals.
Powder coating
| Specific gravity | 1.15~1.8g/cm° (depending on the color and gloss) |
| Particle size | 100% less than 100 microns (can be adjusted according to the special requirements of the coating) |
| Powder fluidity | 140-150 |
| Construction process | 1. Electrostatic spray gun can be used for coating, and the film thickness is suitable to be controlled at 70-90 microns. (MDF substrate needs to be heated and homogenized in an infrared oven in advance and preheated. The specific heating temperature is determined according to the heat capacity of the MDF substrate.) |
| 2. Curing conditions: 140℃, 5-8 minutes (referring to the surface temperature of the MDF board). The oven can use an ordinary hot air circulation oven or a drying tunnel. If conditions permit, it is best to use an infrared oven to quickly heat and level the newly sprayed coating, and then send it to an ordinary oven for baking and curing. |
Send product request
Other supplier products
 |
Orange-Red Pearlescent Powder Coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction Key attributesDetails CAS No. 12006-26-2 Place of Origin China EI... |
 |
Epoxy/Polyester Powder Coatings | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certif... |
 |
Thin-coat powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com MT-MY1832 Imitation copper 1 MT-MY1834 Golden yellow MT-MY1833 Imitation co... |
 |
Light Green Matte Powder Coating | Powder type Epoxy-Polyester, Polyester Applications Exterior Industrial, Specialized Finish type Smooth Color standard：RAL RAL colors：RAL Cl... |
 |
Polyester based powder coating MT-JA020G White | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-JA020G is a polyester based powder coating, formulated using TGIC and is des... |
Same products
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
