ANTIMICROBIAL POWDER COATINGS
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Made of inorganic antibacterial agent, with long-term antibacterial properties, suitable for indoor and outdoorenvironment Properties: – Prevent the breeding of Escherichia coli, aflatoxin, Gambococcus, Penicilliumcitrullus, Bacillus citrullus, trichoderma, dermatophyllus, rhodococcus.
PRODUCT FEATURES
Product performance:
long term Up to 4N- 5N
(99.99-99 .999%)
Application:
kitchen utensils: dishwasher, stove, cupboard, etc
Household appliances: refrigerator, freezer, water dispenser, microwave oven, etc
Medical equipment: medical beds, etc
Spraying method:
high voltage electrostatic sprayin 60-80KV
Recommended film thickness:
60-80 um
Application parameters
Curing time
200°Cx10–15mins
STANDARD TEST METHOD FOR ITEMIZER
In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um,and the, performance index of the film would change slightly with different gloss.
This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and otherheavy metals, and meets RoHS requirements .
Storage conditions: dry at about 35°C, stored in the ventilated room, avoid direct sunlight. Under these conditions, thepowder can be stored for 12 months, product can still be used after re- examined to be in good condition even if it is foundto be expired.
Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and donot represent the performance commitment of the product application.
The results vary with environmental factors and other conditions.
Send product request
Other supplier products
 |
Powder coatings for Automotive trim parts | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2201 powders can be used for pillars and appliqués, roof... |
 |
Jade Scenery in Cuigu, Jiangsu powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Characteristics of powder coatings 1. The coating film is flat and smooth; 2. The ... |
 |
Antistatic powder coating | Introduction: Made of antistatic materials, suitable for indoor and outdoor environments Features: The volume resistivity of the coating is as... |
 |
Medical device friction powder Factory Supplier | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Accurate selection of powder has always been a problem for the powder industry. To solv... |
 |
Building Materials Super Weather Resistant Powder | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Powder characteristics With excellent weather resistance, it not only has the chara... |
Same products
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
