.

Epoxy-polyester powder coating MT-APA EL286A/MT- EL286A

Getaquote

whats/app:+86 132 6275 2056

WEB: std-coatings.com

Product Description

MT-APA is an epoxy-polyester powder coating primer especially designed for direct application on substrates that are sensitive to out-gassing, such as Hot Dip Galvanized steel, Metal spraying, Zamak, Cast steel, Aluminium, brass etc. MT-APA offers excellent flow, chemical and salt spray resistance, and resistance to mechanical damage. MT-APA is suitable for use as a primer for a variety of liquid topcoats, however it is recommended that pre-qualification tests for intercoat adhesion be carried out prior to use

Powder Properties

Appearance Smooth
Chemical type Epoxy-Polyester
Color Grey
Recommended Film Thickness (µm) 50 – 80 µm
Density (g/cm3) 1.68 ± 0.03 g/cm³
Application Electrostatic
Storage Under dry, cool (≤ 25°C) conditions
Shelf life 24 months below 25ºC

Pretreatment

For optimum coating performance the following pre-treatment is recommended prior to the application of MT-APA. The pre-treatment should be used in accordance with the supplier’s recommendations.

a) Aluminium Multistage chrome chromate or chrome phosphate

b) Galvanised Steel Multistage zinc phosphate or chromate

c) Steel Multistage zinc or iron phosphate

Application

MT-APA is suitable for corona electrostatic spraying. Tribo application is not recommended.

Recommended film thickness 50-80 µm, good protection is linked with the recommended film thickness.
Recycling Unused powder can be reclaimed using suitable equipment and recycled through the coating system, but a minimum of 70% new powder should be used.

Note: Failure to comply with the recommended curing conditions may affect the adhesion of the topcoat and cause degradation of the system performance properties. Parts coated with MT-APA should not be handled if possible. If handling is unavoidable, clean lint-free gloves must be worn.


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Powder coatings for Automotive trim parts MT-A2201/MT-YZ204I
Powder coatings for Automotive trim parts MT-A2201/MT-YZ204I Product Description MT- A2201 clearcoats can be used for pillars and appliqués, roof racks, grille guards, bumpers, and mirror housings, al...
Micaceous iron oxide Portafer AP65
Micaceous iron oxide Portafer AP65 Introduction Micaceous iron oxide (Fe2O3) is a naturally occurring iron oxide with a layered structure similar to mica (hence the name). Features...
Epoxy Anti-Corrosion Powder Coating for Pipeline Internal Coating
Epoxy Anti-Corrosion Powder Coating for Pipeline Internal Coating Product Introduction:This product is formulated using special epoxy resin and functional curing agents. It features high reactivity, strong adhesio...
Self-crosslinking modified acrylic copolymer emulsion STD-20068
Self-crosslinking modified acrylic copolymer emulsion STD-20068 Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction STD-20068 is a self-crosslinking modified acrylic copolymer emulsion with ...
Polyester based powder coatings MT-620 AM
Polyester based powder coatings MT-620 AM Product Description MT-620 AM is a series of polyester based powder coatings, formulated without the use of TGIC, designed for the exterior enviro...
All supplier products

Same products

Metallic flat high gloss Powder Coating  MT-049/98010
Metallic flat high gloss Powder Coating MT-049/98010 Seller: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co...
Pure epoxy powder coating Factory Supplier
Pure epoxy powder coating Factory Supplier Seller: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist...
Epoxy polyester powder coating Factory Supplier
Epoxy polyester powder coating Factory Supplier Seller: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc...
Pure polyester weather-resistant powder coating Factory Supplier
Pure polyester weather-resistant powder coating Factory Supplier Seller: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris...
Metallic flat semi-gloss Powder Coating  MT-049/97003
Metallic flat semi-gloss Powder Coating MT-049/97003 Seller: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co...