High durability powder coatings MT-810 AM
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Product Description
MT-810 AM is a series of high durability powder coatings, formulated without TGIC, designed for exterior exposure. Tested against the most severe specifications MT-810 gives significantly improved gloss retention and resistance to colour change. MT-810 AM powders are available in a wide range of colours and gloss levels and can be custom matched to the user’s requirements. MT-810 AM is a high-quality powder coating designed to meet decorative and functional demands of your specifications. Additionally MT-810 AM uses antimicrobial technology to reduce the number of microbes such as bacteria and mold. Test results have proven reduction of bacteria and mold up to 99.9%.
Powder properties
| Chemical Type | Polyester TGIC-free |
| Particle Size | Suitable for electrostatic spray |
| Specific gravity | 1.2-1.7 g/cm³ depending on colour |
| Storage | Dry cool conditions below 25°C |
| Shelf life | 12 months |
| Stoving schedule
(object temperature) |
15 minutes at 190°C
10 minutes at 200°C 8 minutes at 210°C |
Test Conditions
The results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Pre-treatment | Chromate conversion |
| Substrate | Aluminium |
| Stoving Schedule
(object temperature) |
10 minutes at 200°C |
| Film Thickness | 60 microns |
Mechanical Tests
| Adhesion
(2mm Crosshatch) |
ISO2409 | Gt 0 |
| Erichsen cupping | ISO1520 | Depends on shade |
| Hardness (4000gms) | ISO 1518 | Pass – no penetration to substrate |
| Flexibility (Conical Mandrel) | ISO6860 | Depends on shade |
| Impact | BS6496 | Depends on shade |
Send product request
Other supplier products
 |
High-End Industrial Powder Coatings | 1. Key Industries & Requirements High-end sectors demand certified performance, durability, and compliance: Aerospace/Defense: Corrosion, UV,... |
 |
Black Powder Coatings — Reliable Supply from China | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction We are a China-based manufacturer specializing in industrial-grade black ... |
|
|
Anodized Powder Coating | Introduction： It is suitable for anodic oxidation effect for product appearance, as well as environmental protectionrequirements such as Rohs and ... |
 |
Special Powder Coating for Coil and Pre Coating Plate Factory Supplier | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Characteristic: Special powder coatings for coil and pre coating plate is n... |
 |
Polyurethane Powder Coatings | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance -Good transfer print ability -Better performance... |
Same products
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
