Standard Building Materials Powder Coating
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Polyester resin and TGIC curing agent as the main raw materials.
Coating characteristics:
Good adhesion, excellent mechanical properties, tough coating film.
Smooth and smooth film
Good Outdoor endurance
Excellent resistance to excessive baking
Application:
Suitable for various outdoor products such as:outdoor lighting, beach chair, solar water heater,
outdoor air conditioning unit, aluminum curtain wall,door and window frame, ceiling, highway guardrail,fence, sports facilities, communication equipment,etc
Application parameters:
Curing time
200°Cx10–15 mins
Recommended filmthickness:
60-80 um
Spraying method:
high voltage electrostatic sprayin60-80KV
STANDARD TEST METHOD FOR ITEMIZER
In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um,and the performance index of the film would change slightly with different gloss.
This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and otherheavy metals, and meets RoHS requirements.
Storage conditions: dry at about 35C, stored in the ventilated room, avoid direct sunlight. Under these conditions, thepowder can be stored for 12 months, product can still be used after re-examined to be in good condition even if it is foundto be expired.
Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and donot represent the performance. commitment of the product application.
The results vary with environmental factors and other conditions.
Send product request
Other supplier products
 |
Powder coating for New energy | Introduction Insulating powder coatings protect the strong power of new energy vehicles. The new energy vehicle market has developed rapidly in t... |
 |
Powder coating for construction machinery | Introduction Engineering machinery is an important part of the equipment industry. Engineering machinery can be seen in major areas related to nat... |
|
|
Polyester and acrylic based powder coating MT-CA220G White | Product Description MT-CA220G is a polyester and acrylic based powder coating designed for exterior exposure offering low gloss and weather resist... |
 |
Electrical Insulation Powder Coatings | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Feature: Granularity 100~200μm>=70% 260μm<=0.5% External appearance... |
 |
Anti-Slip / Non-Skid Powder Coatings | Anti-slip powder coatings are specially formulated textured coatings designed to increase surface friction and prevent slipping. They are ideal for... |
Same products
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
