Motion Controller
Motion controller KZ-100
Motion Controller
Motorized Stage
SPECIFICATION:
1、General
The mobile stage controller/driver is used for driving 2-phase stepper motor. It can drive 4 motors independently at most. You can use its controlling stick to make motors run/stop manually. It also can be controlled by a PC through RS232 interface.
2、Connection
(1) X-DIR：Connect this port to X direction stepper motor of mobile stage using a DB9(female)－DB9(male) cable. Connection/Disconnection only when POWER OFF!
(2) Y-DIR：Connect this port to Y direction stepper motor of mobile stage
using a DB9(female)－DB9(male) cable. Connection/Disconnection Only when POWER OFF!
(3) Z-DIR：Connect this port to Z direction stepper motor of mobile stage using a DB9(female)－DB9(male) cable. Connection/Disconnection only when POWER OFF!
(4) L-DIR：Connect this port to L direction stepper motor of mobile
stage using a DB9(female) － DB9(male) cable.
Connection/Disconnection only when POWER OFF!
(5) RS232：RS232 port, Connecting to RS232 port of PC。
(6) DC18V3A(Power Supply)：Using AC adapter in accessory。
3、Programming
(1) The mobile stage controller/driver communicates with PC using interface of RS232；
(2) RS232 prototype：Baud rates 57600，no parity，8data bits，1stop bits；
(3) Method：PC sends 1 byte to the mobile stage controller/driver, then waits for the mobile stage controller/driver sending back a byte of 0Dh(ASCII of Return), until now the PC can send next byte to the mobile stage controller/driver. Repeat former procedure to finish a 4-byte-command。
(4) Send a synchronous command before sending programming command.
The synchronous command is: 55h, 55h, AAh, 55h;
Send product request
Other supplier products
 |
XY AxisManual Linear Stage, Manual Displacement Station PT-XY24-80C/R/L | XY AxisManual Linear Stage, Manual Displacement Station PT-XY24-80C/R/L Manual Linear Stage Manual Stage Model Number PT-XY24-80C ... |
 |
85mmTrack Stand Microscope Stand ZJ-630 | 85mmTrack Stand Microscope Stand ZJ-630 Microscope Stand Microscope Stand and E-Arm SPECIFICATION: Specification: Scope holder:Φ85mm Tr... |
 |
Electric Lifting Platform, Motorized Lab Jack, Elevator, Optical Sliding Lift PT-GD401 | Electric Lifting Platform, Motorized Lab Jack, Elevator, Optical Sliding Lift PT-GD401 Motorized Lab Jack Motorized Stage Electric Lifting Platf... |
 |
Motorized XY Integral Combinating Stage | Motorized XY Integral Combinating Stage Motorized Stage Item Number PT-XY50 Structure Travel Range 50mm Platform 150mm ×... |
 |
PT-GD105 High Precision Motorized Linear Stage | PT-GD105 High Precision Motorized Linear Stage Motorized Linear Stage Motorized Stage SPECIFICATION: Item Number PT-GD10550 P... |
Same products
 |
MTFH63-211GRB-11A36 11Pin PH1.27mm Vertical Dual Row Female Header | Seller: MTCONN ELECTRONICS CO.,LTD | This dual-row vertical surface-mount (SMT) gold-plated headerfeatures a 1.27mm pitch design with ... |
 |
HM Pumex Grinding Machine | Seller: Shenzhen JuYongNeng Technology Co., Ltd | HM Pumex Grinding Machine Product Description Name TSP HM3/6-75 S/Z... |
 |
Dynamic Axial Compression Column | Seller: Xinsheng Pharmaceutical Instrument Co., Ltd | A DAC column,or Dynamic Axial Compression column,is a self-packingcolumn used for separation in l... |
 |
China manufacturer Turbine bolt electric heater ZJ-17-T4 for power generation | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China manufacturer Turbine bolt electric heater ZJ-17-T4 for power generation Is YOYIK for the u... |
 |
China factory Turbine bolt electric heater ZJ-20-16 for power station Deyang | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory Turbine bolt electric heater ZJ-20-16 for power station Deyang YOYIK have power pl... |
