Styrene CAS 100-42-5
Introduction
Styrene SDEB is a type of styrene produced by catalytic dehydrogenation of ethylbenzene. It is used to manufacture polystyrene, ABS plastic, styrene acrylonitrile, latex, and rubber.
Names and Identifiers
| Name | Styrene |
| Synonyms | SM Styrol STYROL Styrene Cinnamol CINNAMENE FEMA 3233 Cinnamene VINYLBENZENE Vinylbenzene Vinyl benzene PHENYLETHYLENE Ethenylbenzene ETHENYLBENZENE Phenylethylene STYRENE MONOMER Styrolene Styrene Monomer styrene monomer stab. |
| CAS | 100-42-5 |
| EINECS | 202-851-5 |
| InChI | InChI=1/C8H8/c/h2-7H,1H2 |
| InChIKey | PPBRXRYQALVLMV-UHFFFAOYSA-N |
Physico-chemical Properties
| Molecular Formula | C8H8 |
| Molar Mass | 104.15 |
| Density | 0.906 g/mL at 25 °C |
| Melting Point | -31 °C (lit.) |
| Boling Point | 145-146 °C (lit.) |
| Flash Point | 88°F |
| Water Solubility | 0.3 g/L (20 ºC) |
| Solubility | 0.24g/l |
| Vapor Presure | 12.4 mm Hg ( 37.7 °C) |
| Vapor Density | 3.6 (vs air) |
| Appearance | Liquid |
| Specific Gravity | 0.909 |
| Color | Colorless |
| Exposure Limit | TLV-TWA 50 ppm (～212 mg/m3) (ACGIHand NIOSH), 100 ppm (～425 mg/m3)(OSHA and MSHA); ceiling 200 ppm, peak600 ppm/5 min/3 h (OSHA); STEL 100 ppm（～425 mg/m3) (ACGIH). |
| Merck | 14,8860 |
| BRN | 1071236 |
| pKa | >14 (Schwarzenbach et al., 1993) |
| Storage Condition | Store at |
| Stability | Stable, but may polymerize upon exposure to light. Normally shipped with a dissolved inhibitor. Substances to be avoided include strong acids, aluminium chloride, strong oxidizing agents, copper, |
| Sensitive | Air Sensitive |
| Explosive Limit | 1.1-8.9%(V) |
| Refractive Index | n20/D 1.546(lit.) |
| Physical and Chemical Properties | Colorless oily liquid with aromatic odor. boiling point 145 ℃ freezing point -30.6 ℃ relative density 0.9059 refractive index 1.5467 flash point 31.11 ℃ solubility insoluble in water, soluble in ethanol and ether. |
| Use | Mainly used as polystyrene, synthetic rubber, engineering plastics, ion exchange resin and other raw materials |
Risk and Safety
| Risk Codes | R10 – Flammable R20 – Harmful by inhalation R36/38 – Irritating to eyes and skin. R40 – Limited evidence of a carcinogenic effect R36/37/38 – Irritating to eyes, respiratory system and skin. R39/23/24/25 – R23/24/25 – Toxic by inhalation, in contact with skin and if swallowed. R11 – Highly Flammable R48/20 – R63 – Possible risk of harm to the unborn child |
| Safety Description | S23 – Do not breathe vapour. S36 – Wear suitable protective clothing. S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S16 – Keep away from sources of ignition. S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S36/37 – Wear suitable protective clothing and gloves. S7 – Keep container tightly closed. S46 – If swallowed, seek medical advice immediately and show this container or label. |
| UN IDs | UN 2055 3/PG 3 |
| WGK Germany | 2 |
| RTECS | WL3675000 |
| TSCA | Yes |
| HS Code | 2902 50 00 |
| Hazard Class | 3 |
| Packing Group | III |
| Toxicity | LD50 in mice (mg/kg): 660 ± 44.3 i.p.; 90 ± 5.2 i.v. |
Use
This product is mainly used as polystyrene, Styrene Butadiene Rubber Engineering Plastics (such as ABS, AAS, etc.), ion exchange resin, medicine and other raw materials.
Send product request
Other supplier products
 |
Epoxy powder coatings | Product description MT-100 is a series epoxy based powder coatings that exhibit excellent corrosion protection and chemical resistance when applie... |
 |
PTFE powder coating | Product introduction Polytetrafluoroethylene (PTFE), commonly known as “the king of plastics”, is a polymer compound formed by the pol... |
 |
High boiling aromatic hydrocarbon solvent | Introduction High boiling point aromatic hydrocarbon solvent than the traditional toluene, xylene little toxicity, Flash point is high, use and tr... |
 |
MBTS (DM) CAS 120-78-5 Accelerator | Introduction Chemical Name:Dibenzothiazole disulfide CAS NO.:120-78-5 Product Specification: Appearance Grayish white to yellowish powde... |
 |
Silicone fluid（MT6000 ） | Introduction PRODUCT DESCRIPTION MT6000 is a silicone fluid based on straight chained polydimethylsiloxane fluid. APPLICATIONS • Therm... |
Same products
 |
Epoxy/Polyester Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Seller: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Seller: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Seller: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
