Methylated Melamine Resin
Introduction
This category of products mainly consists of methanol and hydroxymethyl melamine reacting in different molar ratios to form highly methylated, partially methylated, and highly imido methylated melamine resin products. This series of products can react with functional polymers with hydroxyl, carboxyl, and amide groups to produce flexible, scratch resistant, and adhesive products, which are widely used in coating systems based on acrylic acid, polyester, alkyd, epoxy resin, and polyurethane.
| High solid methyl etherified melamine resin products |
| MT300 |
White waxy solid |
≥98 |
– |
≤0.1 |
– |
Fully methylated hexahydroxymethyl melamine resin |
|
| MT 303 |
Colorless viscous liquid |
≥98 |
2000-6000 |
≤0.3 |
– |
Highly methylated hexahydroxymethyl melamine resin |
|
| MT 303lf |
Colorless viscous liquid |
≥98 |
2000-6000 |
≤0.1 |
– |
low free formaldehyde303 |
|
| MT 303w |
Colorless viscous liquid |
≥96 |
2000-6000 |
≤0.5 |
– |
303 |
|
| High iminomethylated dense amine resin |
| MT 325 |
Colorless viscous liquid |
78-82 |
2500-4500 |
≤0.75 |
|
Fast curing, no need for strong acid catalysis, low formaldehyde emission |
|
| MT 327 |
Colorless viscous liquid |
88-92 |
5100-16000 |
≤0.8 |
|
Fast curing, no need for strong acid catalysis, low formaldehyde emission |
|
| MT 385 |
Colorless viscous liquid |
76-81 |
1000-1600 |
≤0.4 |
|
Fast curing, no need for strong acid catalysis, low formaldehyde emission |
|
| Part of the methylated melamine resin |
| MT 370 |
Colorless viscous liquid |
86-90 |
5100-10200 |
≤3.5 |
|
No need for curing, no need for strong acid catalysis |
|
| MT 380 |
Colorless viscous liquid |
76-82 |
1200-3500 |
≤2.5 |
|
No need for curing, no need for strong acid catalysis |
Other supplier products
|
|
Polyurethane based powder coating White |
Product Description
MT-PA020G is a polyurethane based powder coating, formulated without TGIC and is designed for exterior exposure offering excel... |
|
|
Isophorone (IPHO) CAS 78-59-1 |
Introduction
Chemical Name:
IPHO, Isophorone, 3,5,5-Trimethyl-2-Cyclohexene-1-One, 1,1,3-Trimethyl-3-cyclohexene-5-one
Molecular F... |
|
|
4,4′-oxydiphthalic Anhydride(ODPA) CAS 1823-59-2 |
Introduction
4,4 ‘-oxybis-phthalic anhydride is a white to white powder organic substance that can be used to make polyimide resins.
Applic... |
|
|
Epoxy Adhesive |
MT 4003/5112/3042/4512LV series and EP242 series:
The characteristics of good toughness, wide applicable temperature, and moderate activation time... |
|
|
Styrene CAS 100-42-5 |
Introduction
Styrene SDEB is a type of styrene produced by catalytic dehydrogenation of ethylbenzene. It is used to manufacture polystyrene, A... |
All supplier products
Same products
