60mm Servo Motor
Note :
1.When install or disassemble servo motors , pls don’t knocl motor and shaft , or it will damage the encoder .
2.Pls try best to prohibit the vibration of axle base to avoid the damage of shaft .
3.Motor and driver should connect reliably to avoid the damage of motor and encoder .
4.When installing , pls make sure the motor shaft and load shaft concentricity .
Other supplier products
|
Planetary Reducer |
Planetary Reducer |
|
1.2 Degree Nema 34 Stepper Motor 863P |
Step Angel: 1.8 degreeStep Angel Accuracy: ±5%Resistance Accuracy: ±10%Inductance Accuracy:±20%Temperature Rise: 80°C MaxA... |
|
Motor Driver 2H1106T |
Microstep setting:Users can set the driver Microstep by the SW1-SW5 five switches,total 28 micro-step. When you set the microstep , pls stop the dr... |
|
AC Stepper Motor Driver 2H8006T |
Characteristic :1.Using new digital sinusoidal micro-segmentation algorithm 2.Support single / dual control pulse input 3.A test run function, powe... |
|
Motor Driver For Nema 2M423A |
Self test function:When SW1-SW5 is OFF , Inner of drive send 1K pulse to test whether the motor,wire,and self is normal. |
供应产品
Same products