Oxygen Sensor HXSS-12011
The oxygen sensor is used to determine the engine exhaust oxygen if excess ,namely the content of oxygen,and the oxygen content is converted to a voltage signal then delivered to the engine computer,so that the engine can realize to excess air factor as the goal of the closed loop control.To ensure that three way catalytic converter on the exhaust of hydrocarbons(HC),carbon monoxide(CO)and nitrogen oxides(NOX)three kinds of hydrocarbons(HC).
Other supplier products
|
Paykan Speed Sensor HXSS-51009 |
The speed sensor is installed on the transmission output shaft or wheel.It used to collect speed signal output to the control module.The formula em... |
|
Water Temperature Sensor HXSS-10102 |
Water temperature sensor installed in the car engine cylinder or the water jacket of cylinder cover,and direct contact with cooling water,used to d... |
|
Crankshaft Position Sensor HXSS-52071 |
The crankshaft sensor is used in automotive engine ignition system.By inducting crankshaft TDC signal to send the ignition timing signal to the ECU... |
|
Oxygen Sensor HXSS-12009 |
The oxygen sensor is used to determine the engine exhaust oxygen if excess ,namely the content of oxygen,and the oxygen content is converted to a v... |
|
Water Temperature Sensor HXSS-10067 |
Water temperature sensor installed in the car engine cylinder or the water jacket of cylinder cover,and direct contact with cooling water,used to d... |
供应产品
Same products