Vibrating Feeder
Vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gears are jogged. When installation, the two gears must be jogged according to the sign. Through drive of the motor, the two eccentric shafts start rotating to produce a linear huge power which forces the feeder to vibrate. Through the vibration, the materials will slip and sling on the funnel, moving forward, when the materials pass the screening part, smaller parts will fall down, and avoiding the further crushing, so screening purpose can be reached.
Other supplier products
|
Laboratory Single Cell Flotation Machine |
Introduction of denver smaple test laboratory flotation machine : XFD series denver smaple test laboratory flotation machine is provided for flotat... |
|
Laboratory Test Vibrating Sieve |
Introduction& Application of laboratory vibrating sieving machine: laboratory vibrating sieving machine is widely applied in laboratories for ... |
|
Trommel Screen |
Trommel Screen Description: The trommel screen mainly consists of motor, reducer, drum units, racks, etc. Inclination of drum equipment, motor is c... |
|
Jaw Crusher |
The motor drives belt and belt wheel, the eccentric shaft causes the movable jaw to move down and up, forward and backward, the angle between toggl... |
|
Small Magnetic Separator |
Description of Small Magnetic Separator Small Magnetic Separator is used to separate magnetite, hematite, limonite, pyrrhotite, ilmenite smaller th... |
供应产品
Same products