Much Evaporator

working principle
Evaporation process is much effect by multiple evaporator the evaporation of the combined operation of the process. Much effect when the operation of the following effects evaporate required pressure and solution the boiling point of the previous effect is low, the efficiency of the two times before introducing steam as the lagged heating medium, namely the heating room become particularly before two steam condenser effect, only the first effect need to consume raw steam. General much effect at the end of the evaporation or a few effect after effect is always in the vacuum operation, because each effect (from the outside effect) 2 times as a steam heating effect of the steam, therefore improving the utilization rate of raw steam, namely the economy. Need to emphasize that the evaporation capacity and heat transfer quantity direct proportion, much effect does not improve evaporation mass, and just to save the heating steam, the price increase is the equipment investment. In the same operation conditions, many of the evaporator production capacity is not better than heat transfer area and one single evaporator equal effect of great capacity of production. http://www.heyuanjx.com.cn/



在线询价

至: Huzhou Heyuan Machine Co.,Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Efficient Machine So Thick
Efficient Machine So Thick
DI Continuous Level Vacuum Belt Drying Filter
DI Continuous Level Vacuum Belt Drying Filter
DU So Of Vacuum Belt Dewatering Machine Is Provided
DU So Of Vacuum Belt Dewatering Machine Is Provided
DZY Level BeDZY Level Belt Filterlt Filter
DZY Level BeDZY Level Belt Filterlt Filter
DU Rubber Belt Type Vacuum Filter
DU Rubber Belt Type Vacuum Filter
供应产品

Same products

地脚螺栓 卖方: 河北冀南标准件 我们公司生产和供应脚螺栓、脚螺栓广泛应用于各种固定的车床,铣床,食品机械、化工机械、制药设备、冶金设备、轧制设备,娱乐设施等等。脚螺栓制造按照GB 799 - 88标准,规格有:M12mm-M1...
地脚螺栓 卖方: 河北冀南标准件 我们公司生产和供应脚螺栓、脚螺栓广泛应用于各种固定的车床,铣床,食品机械、化工机械、制药设备、冶金设备、轧制设备,娱乐设施等等。脚螺栓制造按照GB 799 - 88标准,规格有:M12mm-M1...
焊接螺柱 卖方: 河北冀南标准件 我们公司供应焊钉。我公司常年生产和供应各种大小规格的焊接螺柱Ф10毫米~Ф25毫米,50 mm ~ 300毫米的长度,原材料是SWRCH15A ML15AL或ML15。我们公司原材料都来自大型知...
六角头螺栓 卖方: 河北冀南标准件 我们公司专业生产各种规格的六角头螺栓,济南品牌各种六角螺栓规格齐全以稳定的质量和低廉的价格。我们正在寻找直接的销售合作伙伴面临全国工业企业用户,减少中间环节的营销和为客户节省采购成本。
扭剪型螺栓 卖方: 河北冀南标准件 我们公司常年生产扭转剪切螺栓。本公司常年供应M12 M16、M20,锰,M24 M27、M30六螺纹规格,长度为40毫米- 220毫米和性能级别是10.9(10.9秒)。扭转剪切螺栓的性能满足G...