Glass Mould Brick
With the development of the world automobile industry in recent years the technology on rearview mirror is also greatly improved, as demands a higher request on mold bricks in terms of its performance and quality. We have been working on the research and development. of Mold Bricks since 2000, and in March 2003 success was achieved in the trial manufacture, in Sep 2003 a Mold Brick production line was established, and we are now a factory specialized on Mold Brick for Viewing Mirrors.
►MD Mold Bricks characterize as follows:
1. Low permanent linear change on reheating
Firing under the temperature of 1050 Degree. Ensures no distortion and no permanent linear change on the mold bricks.
2. High dense structure
MD Mold Brick is manufactured from micron grade material, which is pressed molding following being mixed by high speed blender. The maximum rod is 1000 with extremely fine section structure. 3. Good Thermal Shock Stability.
No cracks even chap would be happening after long service of the bricks
4. Easy to be machined
The Mold Brick is manufactured based on the customer request, which avoids waste from cutting of the big blocks.
We have established good fame among our customers since our mold brick line was put into production with some performances superior to similar products available in the market.
MD mold bricks could also be used in thermal bending glass, thermal melting glass and art glass. We sincerely welcome the comments from all our customers.
在线联系供应商
Other supplier products
 |
Big Fireclay Bottom Block | Description:Using big vibrating table and adopting special castables, the company produces furnace large fireclay blocks with vibrate moulding tech... |
 |
Ceramic Fiber Board | Feature ►Application:♦ Ceramic Fiber Board is made of Alumino-Silicate fibrous wool by vacuum forming process.♦ Furnace with high tem... |
 |
Physical properties of refractory materials Organizational structur | 1. Porosity The apparent porosity reflects the density of the refractory material, ie the percentage of apparent pore volume in the brick to the to... |
 |
Silica Hot Repair and Mortar | Directions for use of silica hot repairing mixThe silica hot repairing mix is used for hot repairing of silica brick crown top of glass furnace. Th... |
 |
fireproof case fused cast azs refractory brick for glass furnace, AZS--33,36,41 | Glass furnace brick refractory material AZS brick Fused Cast AZS are the most widely used materials both in glass contact and superstructure of ... |
Same products
 |
科摩罗液氮低温冷冻机 KGSQ ln2 容器 | 卖方: 河南天之道生物科技有限公司 | 在实验室，细胞样本需要放入液氮中进行低温保存，可是有些样本不仅要低温保存，还要气相储存，不与液氮接触。前者用常规液氮罐可解决问题，后者用气相液氮罐也能解决。不过，气相罐的容量都比较大，在350升... |
 |
文莱ln2低温冷冻机KGSQ液氮低温罐 | 卖方: 河南天驰仪器设备有限公司 | 在实验室，细胞样本需要放入液氮中进行低温保存，可是有些样本不仅要低温保存，还要气相储存，不与液氮接触。前者用常规液氮罐可解决问题，后者用气相液氮罐也能解决。不过，气相罐的容量都比较大，在350升... |
 |
不丹ln2低温冷冻机KGSQ液氮罐出售 | 卖方: Henan Tianzhidao Biological Technology Co., Ltd. | 在实验室，细胞样本需要放入液氮中进行低温保存，可是有些样本不仅要低温保存，还要气相储存，不与液氮接触。前者用常规液氮罐可解决问题，后者用气相液氮罐也能解决。不过，气相罐的容量都比较大，在350升... |
 |
MONSA® DDAC-50 | 卖方: Guangzhou Monsa Chemical Co., Ltd | INCI name: MONSA® DDAC-50 It functions by causing the cell membrane of bacteria to rupture... |
 |
MONSA® DCA-50 | 卖方: Guangzhou Monsa Chemical Co., Ltd | INCI name: disodium cocoampho diacetate Disodium cocoamphodiacetate for skinis a very mild amp... |
