Glass Lined Steel Anaerobic Digestion Tanks For Large Biogas Plant
Glass Lined Steelanaerobic digestion tanks are made of glass fused to steel which is superior in corrosion resistant as it is actually the combination of “ glass ” and “ steel “ . So it has the advantages of both: superior corrosion resistance of glass, and strength and flexibility of steel. This is the combination of both to achieve the best. Bolted Steel tank is the best tank to be used as an anaerobic reactor, especially when the media inside than tank could be highly corrosive.
Anaerobic Digestionis a process which decomposes and converts the organic waste into biogas gas, the biological process is called anaerobic digester. The digester reaction needs to do it in some conditions, the decomposition needs to accomplish in the absence of oxygen environment, airtightness environment will be selected as a reactor. In order to achieve full reaction agitator and heating system are required, there is also some temperature requirements during the reaction , mesophiles are most efficient at moderate temperature ranges between 25°C - 40°C while thermophiles run most efficiently at higher ranges between 45°C - 80° C.
Glass Lined SteelAnaerobic Digestion TanksSpecifcations
|
Coating color |
dark blue, dark green , white, and customized |
|
A standard steel plate size |
effective size 2400mm x 1200 m |
|
Steel plates thickness |
3mm - 12mm , depends on the diameter & height |
|
Coating thickness |
|
|
Acid and alkalinity proof |
standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 |
|
Adhesion |
3,450N/cm |
|
Elastic |
same as steel sheet , around 500KN/mm |
|
Hardness |
|
|
Service life |
>30 years |
|
Spark test |
>1500 V |
|
Permeability |
gas and liquid impermeable |
|
Easy yo clean |
smooth, glossy, inert, anti-adhesion |
|
Corrosion resistance |
excellent ! Suitable for waste water salt water, sea water, high sulfur crude oil, salt fox, organic and inorganic compounds |
Glass Lined SteelAnaerobic Digestion TanksManufacturer
Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
在线联系供应商
Other supplier products
 |
Industrial Water Tanks / Glass Fused To Steel Tanks | Center Enamel is the largest manufacturer of GFS industrial water tanks in China since its establishment in 1989, Center Enamel has been engaged in... |
|
|
Glass Fused To Steel Tanks For Water Biogas Storage Wastewater Treatment | High-quality Glass-Fused-to-Steel tank is made of special steel plate, special sealant, self-locking bolt, and the service life for more than 30 ye... |
 |
Glass Lined Steel Septic Holding Tank | Glass Lined Steel Septic Holding Tank Glass Lined SteelSeptic Holding Tanksare a long-term temporary solution for sewage disposal. The tank r... |
 |
GFS Drinking Water Storage Tanks Excellent Aid and Alkali Resistance | Due to its modular structure engineering, GFSdrinking water tank can be designed with various diameter/height configurations according to different... |
 |
Glass Fused To Steel Bolted Storage Tanks For Municipal Sewage Treatment | Sewage treatment is the process of removing pollutants from municipal sewage, mainly including domestic sewage and some industrial wastewater. Phys... |
