2K Mould
2KMoulding Definition
The part molding by 2K Mouldhas been recognized by more and more people because it is superior to traditional injection-good structures and appearances. 2K or 'two-shot' injection moulding consists of processing two different polymers (or two different colors of one polymer) into an end product by means of one injection moulding process.
A two-color injection mould refers to a double shot injection molding processin which two different materials are injection molded into the same set of moulds to form an injection molded part from two materials. Some materials are of two different colors, some are soft and hard, and are molded by the same injection molding machine with two sets of injection mechanical equipment (two-color injection molding machine), and two kinds of plastics are injected in sequence.
After the mold is clamped, the first material is injected into the mold to form first plastic parts, and after the injection is completed, the mould is opened, the first product is left in the core side, and the template is rotated by 180 degrees, then the mould is closed again and the 2nd plastic resin is injected into the mould through the second barrel to form a two-color product.
What is the difference between a 2K mould and a normal mould?
The appearance of the product made by the two-color mould is more beautiful than that produced by the single-color mold, and it is easy to change the color without painting. The disadvantage is the high cost and high technical requirements.
The double shot mouldingis formed by mixing two materials, The two materials must have good bonding strength. In order to ensure good bonding strength, the bonding performance test must be carried out first, and the bonding performance is confirmed to be put into production.
The two cores of the 2K mould are the same, and the cavity is different.
The cavity and core of the double shot mould must be matched, which requires precise positioning of the mold base.
In the second injection molding of the two-color mold, in order to avoid the 2nd cavity scratching the first molded product, it is possible to design some clearance, but the strength of each sealing position must be carefully considered.
Two-color product application range:
Product function requirements, such as some light-transmitting buttons, power switch, remote control buttons, car switches, etc..
Improve the touch feel. Some hand-held products use soft rubber to feel comfortable, such as toothbrushes.
Increase the aesthetic appearance of the product, such as some two-color buttons and the logo of appearance parts, which are beautiful and will not be rubbed off.
The top and bottom covers of some electronic products, or the plastic cover with waterproof performance.
The nozzle of the 2k injection mouldingmachine mainly has two parallel injection systems or is L-shaped.
As a two shot moulding ltd, we have types of custom plastic injection molding chinafor sale, if you have needs, please contact us.
在线联系供应商
Other supplier products
 |
Plastic Insert Mold 139-86 | Mould Name: Plastic Insert Mold Part Material: PA + Glassfiber Product Size: 11*30*1.3 Product Description: Stator Mould Cavity: 4 Cavities Mo... |
 |
Insert Molding Technologies for Automotive Industry | Insert Molding Technologiesfor Automotive Industry Mould Type: Automotive Sensor Plastic Injection Mould Production Material: Nylon PA66 N... |
 |
Injection Mold Manufacturing | HanKing Mouldhas the advantages of low labor cost, short mold manufacturing lead time, excellent equipment, and can process high-precision parts, c... |
 |
Multi Cavity Mould | 24 Cavities Plastic Injection Mold Product Name: 24 Cavities Plastic Injection MoldMold Base: LKM, HASCO, DME, etc.Mold Steel: NAK80, ASSAB8407, S1... |
 |
Industrial Molding Parts | Industrial hanking mould parts are referred to the plastic parts of industrial products, HanKing Mould Enginering Ltd.preferred to think of it as n... |
Same products
 |
ETH Ethereum Jasminer X4 BRICK ASIC Miner | 卖方: Shenzhen Dovina Electronic Co.,Ltd | Jasminer X4 Brick Review Jasminer x4 brick for salefrom Jasminer mining EtHash algorithm with a ... |
 |
ETH Ethereum Jasminer X4-1U ASIC Miner | 卖方: Shenzhen Dovina Electronic Co.,Ltd | TheJasminerx4-u1 miner has a different look than the X4 mining unit. So you get a miner with a sl... |
 |
ETH Ethereum Jasminer X16 ASIC Miner | 卖方: Shenzhen Dovina Electronic Co.,Ltd | Model X16Qfrom Jasminer mining EtHash algorithm with a maximum hashrate of 1.845Gh/s for a power ... |
 |
ETH Ethereum iPollo V1 Mini SE Plus ASIC Miner | 卖方: Shenzhen Dovina Electronic Co.,Ltd | Model V1 Mini SE Plusfrom iPollo mining EtHash algorithm with a maximum hashrate of 400Mh/s for a... |
 |
ETH Ethereum iPollo V1 Mini SE ASIC Miner | 卖方: Shenzhen Dovina Electronic Co.,Ltd | Model V1 Mini SEfrom iPollo mining EtHash algorithm with a maximum hashrate of 200Mh/s for a powe... |
