Air Cooled Spindle Motor
The air cooled cnc spindle motor is normally cooled by an independent fan. It has two shapes: round and square. While the round ones are usually fixed with spindle holders, the square ones with screw holes can typically be directly fixed to the machines. With the characteristics of high power and low temperature rise, the air cooled cnc router spindle motor is often used in CNC Nesting Machine of 3pcs spindles machine and 4pcs spindles machine. As a professional CNC parts manufacturer, Hongyang can provide you with various air spindle motor with different power: 1.5 kw spindle motors for cnc machines and 800w air cooled spindle motor.
Types of Air Cooled Spindle Motor
Changsheng 1.5kw Round Air Cooled Spindle Motor
Huajiang 1.5kw ER16 Round Air Cooled Spindle Motor
Huajiang1.5kw (Φ65*208) Round Air Cooled Sp Indle Motor
Tips of Using Air Cooled Spindle Motor
Please make sure that the air entering the spindle motor should be dry and clean.
If it is not used for a long time, the spindle should be oil sealed; when starting, in addition to removing the rust on the surface with gasoline, the following points should be noted.
1) Lubricate with oil mist for 3-5 minutes, twist the shaft by hand, and feel smooth or not.
2) Use a megohmmeter to check the insulation, which is more than 10 megohms.
3) Turn on the power, please run at 1/3 of the rated RPM for 1 hour, if everything is normal, speed up the operation of 1/2 of the rated RPM for 1 hour, if ok , then run at the full RPM for 1 hour Run.
Air Cooled Spindle Motor Operation Precautions
1.The air cooled spindle motor must be used in conjunction with the frequency converter, and the voltage power and frequency must be matched.
2.The spindle motor should be rotated in the direction marked by the motor, and it is strictly forbidden to change the direction. Observe the direction of rotation before starting
3.The spindle motor often encounters heat during normal operation. When the surface temperature of the air-cooled electric spindle and the environment temperature exceed 30 degrees, it can mainly be regarded as over heat.
4.When the motor is running, there is abnormal sound, or when the vibration is particularly loud, the noise becomes louder, and the bearing should be replaced.
As one of the reliable cnc spare parts manufacturers, we provide cnc machine accessories, spindle motor air cooled,2.2 kw air cooled spindle motor and etc. Want to buy spindle motor or know more? Please contact us.
在线联系供应商
Other supplier products
 |
CNC Router Controller | HYCNC selling cable all conforms to the national standard, the length of the meter is sufficient, and the weight is sufficient. The cable sheath is... |
 |
Bt30 Tool Holder | Bt30 Tool Holder product name: BT ER tool holder Brand: HYCNC Material: 20CrMnTi model: B... |
 |
ER8 Collect | At here, we mainly sell the following products: spindle motors, inverters, stepper motors, hybrid servo motors, drives, guide rails, sliders, gear ... |
 |
CNC Engraving Tool | CNC engraving toolis the tool used for slate leveling. After the measurement, the data is generated, and the data is imported into the machine's pr... |
 |
Electrical Components | As a professional manufacturer that specializes in the production of various types of CNC machine components, HYCNC sells cnc router electronicslik... |
