Plastic Drop Wire Clamp, ACC
|
Clamp Type |
Messenger Diameter,mm |
Materials |
Min Breaking Load,KN |
Packaging |
|
ACC |
2-6 |
PA66 |
1.8 |
41*41*26cm,100pcs/carton |
Key Features:
Dead-ending of round drop cable on poles and buildings.
Suspension of drop cable at intermediate poles by using 2 drop clamps.
Capacity: Ø 2 to 6mm round cables.
Min. failing load : 180 daN
Its unique patented design allows the dead-ending of the cable without any radial pressure on the cable outer sheath and on the fibers. This provides an extra protection of the drop cable.
This ftth clamp produces with high strength and toughness UV resistance plastic. This clamp no need tools when installation and don’t damage cable.
High strength and toughness materials, guarantee long service life, and it can attach to the pole brackets and hooks. All the accessories for FTTH lines can be provided by FOCA.
All the FTTH clamps passed the lab test, such as temperature and humidity test, tensile strength test, aging test, corrosion resistance test etc.
Installation:
The cable span end is introduced in the clamp at point A. The cable roll up is carried out around the mandrel clockwise until the full width of the mandrel is covered (3 full turns in case of a Ø 4mm drop cable). The drop cable exits the clamp through B. The cable section after that point is free of any load and can be connected to the wall distribution box or installed in the next drop clamp in case of double dead-ending.
Adjusting the load on the span side is easily achieved by simultaneously pulling by hand the cable at A and B following the arrows.
在线联系供应商
Other supplier products
 |
Suspension Clamp Big Type For ADSS Cable(HCB-10-15) | Yuyao Foca Communication Equipment Co.,Ltd.Founded in 2015， fast growing company. Which produces a complete solution of products for the fiber opti... |
 |
落线夹支架,YK-OK-01 | 产品描述： 引入电缆支架 YK-OK-01 或 FTTHbracket，设计用于固定或挂钩光纤电缆夹或其他配件。 通常用于 FTTH 网络线路、能源线路或其他架空线路。 |
|
|
Plastic Drop Wire Clamp, ACC | Clamp Type Messenger Diameter,mm Materials Min Breaking Load,KN Packaging ACC 2-6 PA66 1.8 ... |
 |
FIBER OPTIC CABLE Bracket,YKP-01 | Product Description:Fiber optic cable bracket YKP-01 or tension bracket, is designed to anchor or suspension fiber optic cable clamps or other fitt... |
 |
FIBER OPTIC CABLE Bracket,YKP-01 | Yuyao Foca Communication Equipment Co.,Ltd.Founded in 2015， fast growing company. Which produces a complete solution of products for the fiber opti... |
Same products
 |
FT wax used for EVA-based hot melt adhesive | 卖方: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | 卖方: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | 卖方: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 | 卖方: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | 卖方: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
