5-axis Laser Micromachining System
The ordinary laser drilling system can only process the taper hole, and can not achieve the standard straight hole and inverted cone hole processing. Besides the standard straight hole and the taper hole processing, the 5-axis laser micro machining system can also process the inverted cone hole, which greatly expands the laser drilling applications. With different wavelengths and super fast lasers, the thermal effect of drilling is small and the surface treatment is smooth. Only by making the processing materials unlimited, has been applied to drilling and processing in all walks of life.
Key Features Of 5-axis Laser Micromachining System
In order to ensure accurate synchronization, it is necessary to process the position data of each axis under the same processor and control clock. This design uses high speed digital chip FPGA to achieve
The positioning accuracy of the galvanometer will directly affect the machining accuracy of the equipment, and the factors affecting the positioning accuracy of the galvanometer mainly include the accuracy of the galvanometer feedback system, controller and the accuracy of correction.
The self-developed 24-bit high-precision encoder, combined with the high bandwidth driver based on PID and feedforward controller, improves the control accuracy of the system.
Adopt high-precision CNC machine tool to fix and clamp important structural parts at one time to ensure high-precision installation of galvanometer motion module.
Specifications Of 5-axis Laser Micromachining System
|
Working field size (Diameter, Depending On Nozzle Opening) |
mm |
φ0.025mm to φ1mm |
|
Maximum Focus Range In Z Direction |
mm |
±1mm |
|
Entrance Beam Diameter (1/e2) |
mm |
10mm |
|
Focus Diameter In Image Field (1/e²) for M² = 1 |
um |
25um |
|
Maximum Angle Of Incidence |
18° |
|
|
Precession Frequency |
HZ |
200-600HZ（rpm） |
|
Objective Focal Length |
mm |
50mm |
|
Repeatability |
um |
≤0.5um= |
|
Theoretical Resolution Of Incidence Angle |
urad |
2urad |
|
Dimension(L*W*H) |
mm |
601×280×274 |
|
Weight |
Kg |
Hansscannerprovides galvo head, galvanometer scanner, galvano scannerand etc. If you want to know more, please contact us.
在线联系供应商
Other supplier products
 |
Digital Galvo Driver | Hansscannerdigital driver board can drive the full range of Han's Scanner photoelectric galvanometer motor and grating galvanometer motor, one driv... |
 |
Laser Control Card | GMC is a galvanometer motion control card independently developed by Shenzhen Han's Scanner S&T Co., LTD. GMC galvo controlcard embedded softwa... |
 |
Laser Scanning System From Han's Scanner | Han's Scanner focuses on galvo scanning systemsolutions. Our products include Ultragalvo photoelectric scanning galvanometer, Extragalvo grating sc... |
 |
Smart Laser Scanner | Hashu serie is a highly integrated scanning galvanometersystem. The galvanometer control card is perfectly integrated into the inside of the scan h... |
 |
5-axis Laser Micromachining System | 5-axis Laser MicromachiningSystem The ordinary precession drillingsystem can only process the taper hole, and can not achieve the standard strai... |
Same products
 |
ETH Ethereum Jasminer X4 BRICK ASIC Miner | 卖方: Shenzhen Dovina Electronic Co.,Ltd | Jasminer X4 Brick Review Jasminer x4 brick for salefrom Jasminer mining EtHash algorithm with a ... |
 |
ETH Ethereum Jasminer X4-1U ASIC Miner | 卖方: Shenzhen Dovina Electronic Co.,Ltd | TheJasminerx4-u1 miner has a different look than the X4 mining unit. So you get a miner with a sl... |
 |
ETH Ethereum Jasminer X16 ASIC Miner | 卖方: Shenzhen Dovina Electronic Co.,Ltd | Model X16Qfrom Jasminer mining EtHash algorithm with a maximum hashrate of 1.845Gh/s for a power ... |
 |
ETH Ethereum iPollo V1 Mini SE Plus ASIC Miner | 卖方: Shenzhen Dovina Electronic Co.,Ltd | Model V1 Mini SE Plusfrom iPollo mining EtHash algorithm with a maximum hashrate of 400Mh/s for a... |
 |
ETH Ethereum iPollo V1 Mini SE ASIC Miner | 卖方: Shenzhen Dovina Electronic Co.,Ltd | Model V1 Mini SEfrom iPollo mining EtHash algorithm with a maximum hashrate of 200Mh/s for a powe... |
