Carbon Seal
Mechanical carbon sealhas a long history. Graphite is an isoform of element carbon. In 1971, the United States studied the successful flexible graphite sealing material, which solved the leakage of atomic energy valve. After deep processing, the flexible graphite becomes an excellent sealing material, which are made into various carbon mechanical sealwith the effect of sealing components. These carbon shaft sealare used in chemical, petroleum, electric power industries such as high temperature fluid seal.
Because the flexible graphite is formed by the expansion of expanded graphite after high temperature, the amount of intercalating agent remaining in the flexible graphite is very small, but not completely, so the existence and composition of the intercalation agent have a great influence on the quality and performance of the product.
Selection of Carbon Seal Material
The original inventor used concentrated sulfuric acid as oxidant and intercalating agent. However, after being applied to the seal of a metal component, a small amount of sulfur remaining in the flexible graphite was found to corrode the contact metal after long term use. In view of this point, some domestic scholars have tried to improve it, such as Song Kemin who choosed acetic acid and organic acid instead of sulfuric acid. acid, slow in nitric acid, and lower the temperature to room temperature, made from a mixture of nitric acid and acetic acid. By using the mixture of nitric acid and acetic acid as the inserting agent, the sulfur free expanded graphite was prepared with potassium permanganate as oxidant, and acetic acid was slowly added to nitric acid. The temperature is reduced to room temperature, and the mixture of nitric acid and acetic acid is made. Then the natural flake graphite and potassium permanganate are added to this mixture. Under constant stirring, the temperature is 30 C. After reaction 40min, the water is washed to neutral and dried at 50~60 C, and the expanded graphite is made after high temperature expansion. This method achieves no vulcanization under the condition that the product can reach a certain volume of expansion, so as to achieve a relatively stable nature of the sealing material.
Specification of Carbon Ring Seal
Sealcon can produce different carbon ring seals according to different customers’ requirement.
|
model |
M190T |
M106K |
M180K |
M106D |
M160C |
M160B |
|
material |
pure graphite |
furan resin |
furan resin |
antimony carbon |
copper alloy |
Babbitt alloy |
|
density (g/cm3) |
||||||
|
Fractural strength |
100 |
65 |
80 |
65 |
80 |
65 |
|
(MPa) |
||||||
|
compressive strength (MPa) |
250 |
230 |
240 |
200 |
250 |
160 |
|
Shaw hardness |
92 |
90 |
90 |
80 |
75 |
60 |
|
porosity (%) |
2 |
8 |
||||
|
Coefficient of heat |
6 |
|||||
|
expansion (1/℃) |
||||||
|
temperature (℃) |
600 |
210 |
210 |
350 |
350 |
200 |
|
medium |
concentration% |
pure graphite |
furan resin |
antimony |
copper alloy |
Babbitt alloy |
|
hydrochloric acid |
36 |
+ |
0 |
- |
- |
- |
|
sulfuric acid |
50 |
+ |
0 |
- |
- |
- |
|
sulfuric acid |
98 |
+ |
+ |
- |
- |
- |
|
nitric acid |
50 |
+ |
0 |
- |
- |
- |
|
nitric acid |
strong |
- |
- |
- |
- |
|
|
hydrofluoric acid |
40 |
+ |
0 |
- |
- |
- |
|
phosphoric acid |
85 |
+ |
+ |
- |
- |
- |
|
chromic acid |
10 |
+ |
0 |
- |
- |
- |
|
acetic acid |
36 |
+ |
0 |
- |
- |
- |
|
sodium hydroxide |
50 |
+ |
+ |
- |
- |
+ |
|
potassium hydroxide |
50 |
+ |
0 |
- |
- |
+ |
|
sea water |
+ |
+ |
+ |
+ |
+ |
|
|
benzene |
100 |
+ |
0 |
+ |
+ |
- |
|
ammonia |
10 |
+ |
+ |
+ |
+ |
- |
|
acetone |
100 |
+ |
+ |
+ |
0 |
+ |
|
carbamide |
+ |
+ |
+ |
0 |
- |
|
|
carbon tetrachloride |
+ |
+ |
+ |
+ |
+ |
|
|
oil |
+ |
+ |
+ |
+ |
+ |
|
|
gasoline |
+ |
+ |
+ |
+ |
+ |
+ stable - unstable 0 middle (between stable and unstable)
Hangzhou Sealcon Fluid Machinery Co., Ltdis a professional carbon seal ring manufacturer, we provide china agitator, high quality mechanical sealand etc. For more information, please feel free to contact us!
在线联系供应商
Other supplier products
 |
Different Types of Water Pump Seals | Elastomer Rubber Bellow Mechanical Seals Developed with rubber bellow, this type of seal is widely used for water, oil and other light duties appli... |
 |
Flygt Mechanical Seals FBU-28 | China Sealconsupplies a wide range of seal products for pump. Both standard and custom-designed sealing products are available. Top-quality mechani... |
 |
Flygt Mechanical Seals FOL-45 | Replacement for: FOL 45lower parts for flygt 3140, 3152 pump FOL-45 lower parts for flygt 4650, flygt 4660pump FOL-45 lower parts for flygt 2201... |
 |
MECHANICAL SEALS FOR PUMP | Mechanical seal for pump is a kind of dynamic seal assembly, which is widely used on the rotating shaft. It is also known as the end seal. Consisti... |
 |
SINGLE CARTRIDGE SEALS | Our single cartridge mechanical sealis manufactured by balanced seal-face technology, helping to reduce energy comsumption whilst increasing reliab... |
Same products
 |
FT wax used for EVA-based hot melt adhesive | 卖方: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | 卖方: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | 卖方: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 | 卖方: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | 卖方: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
