PTFE Seal
Polytetrafluoroethylene (PTFE), also known as teflon/teflon or plastic king, is a copolymer of tetrafluoroethylene monomer. First, it was developed for national defense and cutting-edge technology and development but later it has gradually extended to civil use, which is generally applied to corrosion-resistant pipes, containers, pumps, high frequency communication equipment and wireless electrical equipment with high performance requirements.
PTFE sealhas become the common seal material for its unique properties.
Performance of PTFE Seal
Stability: almost all chemical resistance, strong acid, strong alkali or strong oxidizer and organic solvents have no effect on it.
Thermal stability: pyrolysis temperature above 400 ℃, therefore, it can work within the scope o - 200 ℃ ~ + 350 ℃.
Wear resistance: the friction coefficient of PTFE material is extremely low, only 0.02, which is 1/40 of rubber.
Self-lubricating: the surface of the PTFE material has a prominent self-lubricating property, and almost all of the viscous material cannot adhere to its surface.
Selection of PTFE Seal Material
However, the pure PTFE has the low strength and the abrasion performance is not very perfect. Usually some inorganic particles are put into the polymer PTFE, such as graphite, molybdenum disulfide, molybdenum disulfide, aluminium oxide, glass fiber, carbon fiber and so on to improve its mechanical properties. It also can be used with other polymers, such as polystyrene resin (PHB), polyphenylene sulfide (PPS), polyether ether ketone (PEEK), poly (perfluorinated (ethylene/propylene copolymer (PFEP) blending method to extend its damping temperature range and improve the creep resistance. Therefore, different PTFE materialas produce all knids of PTFE mechanical seals.
|
properties |
unit |
pure PTFE |
glass fibire filled PTFE |
carbon filled PTFE |
|
density |
g/cm3 |
|||
|
tensile strength |
MPa |
30 |
15 |
13 |
|
℃ |
260 |
260 |
260 |
There are many seal ring suppliers, but Hangzhou SealconFluid Machinery Co., Ltd are one of the best choices for you. we provide sealcon china, quality mechanical seals and etc. Formore information, please feel free to contact us!
在线联系供应商
Other supplier products
 |
Stainless Steel Seal | Stainless Steel is short for stainless acid resistant steel. It is called Stainless Steel with weak corrosive medium or Stainless Steel, such as ai... |
 |
Seal Spare Parts Sealing Rings | Seal Spare Parts Sealing Rings Brief Introduction of Sealing Rings The seal ring is a ring seal with the notch, it is placed in the ring groove o... |
 |
Seal Spare Parts Spring | Introduction ofSeal Springs For a mechanical seal, the initial closing force ensures that the seal will function properly from startup. In end- or ... |
 |
Flygt Mechanical Seals FSU-90 | Replacement for: FSU-90 upper parts for flygt 3230, 3500, 3501 pump FSU-90 upper parts for flygt 3300, 3305, 3310, 3311, 3312, 3350, 3351, 3355, ... |
 |
Ceramic Seal | Ceramic material refers to inorganic non-metallic materials made of natural or synthetic compounds through forming and sintering. It has the advant... |
Same products
 |
FT wax used for EVA-based hot melt adhesive | 卖方: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | 卖方: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | 卖方: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 | 卖方: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | 卖方: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
