Mortar wear tester
Applicable standards:
ASTM G65: A standard published by the American Society for Materials and Testing （ASTM） specifically for evaluating the performance of materials under conditions of mortar wear.
Main parameters:
Test station: refers to the number of samples that the tester can test simultaneously. For example, some testers have 6 stations and can test 6 samples at the same time to improve test efficiency.
Motor speed: refers to the speed of the motor that drives the rotation of the abrasive and sample in the tester. The speed of speed directly affects the speed and degree of wear. The common motor speed range may be between several hundred and several thousand RPM.
Mortar ratio: refers to the mixture ratio of abrasive （such as silica sand, alumina, etc.） and cement slurry. Different proportions may lead to different wear effects and test results. Common mortar ratios may vary depending on test requirements and material characteristics.
Sample size: refers to the size of the sample used for testing. The sample size should meet the requirements of the tester to ensure the accuracy and reliability of the test. Common sample sizes may include cubes or cuboids with specific values of length × width × thickness.
Measuring range and accuracy: The measuring range of the tester refers to the maximum and minimum wear or related parameters that it can measure. Measurement accuracy refers to the accuracy and reliability of the tester in the measurement process. These parameters are crucial for evaluating the wear resistance of the material.Applicable standards:
ASTM G65: A standard published by the American Society for Materials and Testing （ASTM） specifically for evaluating the performance of materials under conditions of mortar wear.
Main parameters:
Test station: refers to the number of samples that the tester can test simultaneously. For example, some testers have 6 stations and can test 6 samples at the same time to improve test efficiency.
Motor speed: refers to the speed of the motor that drives the rotation of the abrasive and sample in the tester. The speed of speed directly affects the speed and degree of wear. The common motor speed range may be between several hundred and several thousand RPM.
Mortar ratio: refers to the mixture ratio of abrasive （such as silica sand, alumina, etc.） and cement slurry. Different proportions may lead to different wear effects and test results. Common mortar ratios may vary depending on test requirements and material characteristics.
Sample size: refers to the size of the sample used for testing. The sample size should meet the requirements of the tester to ensure the accuracy and reliability of the test. Common sample sizes may include cubes or cuboids with specific values of length × width × thickness.
Measuring range and accuracy: The measuring range of the tester refers to the maximum and minimum wear or related parameters that it can measure. Measurement accuracy refers to the accuracy and reliability of the tester in the measurement process. These parameters are crucial for evaluating the wear resistance of the material.
在线联系供应商
Other supplier products
 |
Geomembrane hydrostatic pressure and permeability coefficient tester | Scope of application: It is used to test the hydrostatic pressure resistance and permeability coefficient of nonwoven composite geotextile （one cl... |
 |
Car seat headrest insertion and withdrawal force durability tester | Applicable standards: GB 11550-2009 "Automobile seat headrest strength requirements and test methods" : This standard specifies the test methods a... |
 |
Fabric Downproof Tester(Rolling Box) | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Button Impact Tester | Button Impact Tester Testing Standards:ASTM D5171 Applications:Button Impact Tester is used to determine the impact resistance of plastic sew-thr... |
 |
Respirator Fit Tester | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | 卖方: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | 卖方: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina#Stainless Steel Cylindrical Pin##Denso Common... |
 |
Common Rail injector control valve F00VC01200 | 卖方: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina#Stainless Steel Cylindrical Pin##Denso Common... |
 |
Injector Control Valve Plate 24# | 卖方: China Lutong Part Plant | Injector Control Valve Plate 24# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... |
 |
Injector Control Valve Plate 12# | 卖方: China Lutong Part Plant | Injector Control Valve Plate 12# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... |
