Matrix 4x2 With WIFI&Amplifier SK-WFM42A

Shenzhen Yomband Electronics Co.,Ltd is one of the top level China matrix 4x2 with wifi&lifier sk-wfm42a manufacturers and suppliers equipped with professional matrix 4x2 with wifi&lifier sk-wfm42a factory,Website:http://www.sunking-amazing.es, we are always at your service.Matrix 4x2 with WIFI Amplifier SK-WFM42ASUNKING (HONG KONG) LIMITEDUser ManualWIFI Matrix 4x2 + Amplifier(Support IOS/Android WIFI display, 4Kx2K,Bass/speaker output)MODEL NO.: SK-WFM42AEnjoy the vivid world!IntroductionWIFI 4x2 MatrixThis WIFI 4x2 matrix can connect 4 HD signal sources to 2 HD signal sinks with optical fiber or 3.5mm head output. The matrix allows four HDMI devices to be switched or split easily to two HDMI compatible monitors or projectors. The high resolution is up to 3840x2160/30Hz This matrix can strip audio signal from HDMI signal, output via optical fiber, coaxial, and 3.5 mm audio out . Users can enjoy the shock audio effects without connecting extra amplifier.This matrix also supports WIFI display function. Via Airplay, Miracast, DLNA technology, it can transfer the video or audio from the IOS and Android device to the displayer.FeaturesSupport HDMI 1.4bSupport 3D , up to 4096x2160/30HzSupport highest rate of 3.2 G and TMDS clock can be up to 320 MHzSupport 8/10/12 bit deep colorSupport AWG26 HDMI standard cable:      when the resolution is 1080p and below, input up to 15 meters, output up to 25 meters.      when the resolution is 4K, input up to 12 meters, output up to 15 meters.Four HDMI signal sources can be switched or split to 2 HDMI signal sinksSupport 2.1 channel audio signal amplify, power is up to 30WSupport heavy bass outputSupport 2.1 channel audio 3.5mm audio outputSupport 5.1 channel audio optical fiber and coaxial outputSupport optical fiber audio input 12V/5A power adapterWIFI display features●  Support IOS and Android system WIFI display●  Support HDMI 1.3●  Support resolution 480P/480I/576P/720P/1080I/1080P●  Support WIFI 2.4G/3G/4G/5G, support 2.4G and 5G dual band antenna●  Support one source to one sink WIFI displayWorking connecting: Product interface pictures1: SPEAKER:  The loudspeaker output 2: SUB OUT:   Heavy bass output3:R/L OUT     The stereo output     4: COAXIAL:   Coaxial output 5: OPTICAL OUT:    Optical output6-7: OUTPUTA- OUTPUTB: 2 HDMI signal outputs 8:OUTPUT   WIFI HDMI output9-12: 4 HDMI signal inputs 13:OPTICAL IN:Optical fiber input 14:R/L IN:   The stereo input15:IR:       The infrared receiver16-20:Operation buttons21:Power indicator light22:Input port of the power adapter23:The indicator light of the input HDMI sourcesNote Pls:1. The OUTPUT is the HDMI WIFI output port, it can only output the video signal from the WIFI.2. The amplifier (Speaker and SUB ) and 3.5mm audio has 4 audio sources: the stripped audio signal from HDMI signal, audio signal from WIFI, optical fiber input and stereo input. The optical/coaxial output only comes from stripped audio signal from HDMI signalIndicator light and operation button instructionsA/B key: switch corresponding inputs of OUTA/B“+” key:  Volume +“-” key:  Volume -SELECT key: short pressing is to select different audio inputs, long pressing around 4 seconds is to switch between 2.1 and 5.1 audio channel.L1-L4: indicator light of audio signal selection L5-L8: indicator light of OUTPUT A corresponding inputs selectionL9-L12: indicator light of OUTPUT B corresponding inputs selection The remote control instructions⑴ The four buttons on OUT A is the corresponding input source IN1-IN4 which out from OUT A,IN1-IN4 can be switched freely.⑵ The four buttons on OUT B is the corresponding input source IN1-IN4 which out from OUT B, IN1-IN4 can be switched freely.Volume key: audio volume +/-Bass key: heavy bass volume+/-Select key: select 4 audio input:stripped audio signal from HDMI signal, audio signal from WIFI, optical fiber input and stereo input.   2.1H/5.1H key: switch between 2.1 and 5.1 audio channel.WIFI display operation instructions1、WIFI display setting for IOS and Android system1)、I airplay modeSetting for IOS system mobile , tablet, notebook and other portable devices1>Connect mobile wifi to HDMI Miracast2>Click the airplay on the , choose HDMI Miracast, then open the mirroring switch;3>Users can see the full mirroring on the displayPS: 1.If you don’t open the mirroring switch, you can only see the WIFI display of video, music and picture. 2.Only Ipad2/I4S and above can support mirroring WIFI display.2)Android Miracast mode1>Click mobile system setting->choose display->choose WIFI display2>Find HDMI Miracast, click connection3>Open mobile WIFI setting, connect to the router, then the mobile can transfer the video and surf the internet at the same time.PS: Different mobile s have different names and opening settings of miracast.3) DLNA wireless multimedia share1>Install “Joylink” on the mobile and computer2>Open WIFI, and connect “Joylink” to HDMI Miracast3>Open “Joylink” PC share: Drag the file to “Joylink” window, then you can see the WIFI display on the TV or projector.4) Online video screen share1>Connect HDMI Miracast to TV, power on and switch on2>Make sure HDMI Miracast have been connected to the network properly3>After selecting HDMI Miracast as their player, the DLNA supported third-party application, such as PPTV, Tencent video can WIFI display the online video from the mobile to TV or projector.2、Connection setting for HDMI Miracast to networkHDMI Miracast can broadcast the online video and upgrade itself after connecting with the Internet.  And it needs instruction when it is connected to the internet for the first time.Pls follow this :1.Connect HDMI Miracast to TV, power on and switch on2.Open WIFI, connect with HDMI Wifi-xxx (The last three number depends on numbers shown on your display.)3.Open a browser, and enter URL address which is shown at the bottom of your TV, such as: http:// 192.168.59.254/remote4.Click “WIFI Setup” and connect, then choose ”WIFI Connection”5.Choose the connectable WIFI, enter your password6.After the connected WIFI showing on TV, the connection is well finished.  And the HDMI Miracast will save connection setting automatically. Connection and operations1. Connect HDMI signal sources to the inputs of the matrix by HDMI cables.2. Connect HDMI displayers to the outputs of the matrix by HDMI cables.3. Connect audio output port with stereo amplifier by 3.5mm head or optical fiber.4. Switch the signals freely by the remote control.5. Connect the matrix with 12V power adapter.Specifications:HDMI Version …………………………………………………………………………………………HDMI 1.4bHDMI Resolution ………………………………………………………………………up to 4096x2160/30HzSupport video format ………………………………………………………………8/10/12bit deep color Support audio format……………………………………………DTS-HD/Dolby-trueHD/DTS/Dolby-AC3/DSDMax bandwidth………………………………………………………………………………………………320MHzMax baud rate……………………………………………………………………………………………3.2GbpsInput cable distance……………………………(1080P resolution)≤15m,(4K resolution)≤12m AWG26 HDMI standard cableOutput cable distance…………………………(1080P resolution)≤25m,(4K resolution)≤15m AWG26 HDMI standard cableHDMI input ports…………………………………………………………………………………………………4HDMI output ports………………………………………………………………………………………………2Max working current………………………………………………………………………………………2.58APower adapter format …………………………Input:AC (50HZ, 60HZ) 100V-240V; Output: DC12V/5AOperating Temperature rang………………………………………………………………… (-15 to +55℃)Operating humidity range…………………………………………………5 to 90%RH (No Condensation)Dimension (L x W x H)………………………………………………………………………220x130x33 (mm)Weight…………………………………………………………………………………………………………800gWIFI display output specificationsHDMI resolution……………………………………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480iSupport video format………………………………………………………………………………………8bit Support audio format………………………………………………………………………………………LPCMMax baud rate………………………………………………………………………1.5Gbps Input and output TMDS signal………………………………………………………………………………… 0.5~1.5Volts p-pInput and output DDC signal ……………………………………………………………5Volts p-p (TTL)Output cable distance…………………………………………………≤15m AWG26 HDMI standard cableThe Package includes1. HDMI Matrix 4x2 2. IR remote control3. 12V Power adaper4. User manualNotes:Please use correctly and maintenance properly, to ensure product performance and work properly1.Should Stay away from damp, high temperature, dusty, corrosion and oxidation gas environment in order to avoid damage2.All parts should avoid strong vibration, no collision tapping and drop fall, to avoid damage.3.Do not touch the unit power adapter plugs with wet hand4.Unplug the adapter plug from the power socket, please hold the plug, don't pull thepower cord5.Please turn off the power supply when not use the machine.(unplug the power adapter plug when not use for a long time)6.Please do not open the machine cover, do not touch any device in the machine.7.Please use the power adapter provided or approved by the manufacturer.   Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below:Serial NOTrouble DescriptionCause and Ways to deal with1Non-Power-Connencted1、Check if the power adaptor head is truly and correctly inserted the power socket.2、Check the power switch if it is in on status.2No Picture1、Pls make sure that the TV is on and has been connected with the machine.2、Check if the signal source is on and well connected.3、Check the system connection quality.4、Check if the line is all good quality.5、Check the cable quality3Obscure Picture1、To try again to connect the cable to be free from the unsuccessful connection.2、HDMI Cable Quality4Remote1、Pls check if the film that stops the current has been taken out.2、Check if the remote battery is working full.


在线询价

至: Shenzhen Yomband Electronics Co.,Ltd UJ
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

供应产品

Same products

卖方: SHENZHEN PORSTAR ELECTRONICS CO LTD
卖方: SHENZHEN PORSTAR ELECTRONICS CO LTD
卖方: SHENZHEN PORSTAR ELECTRONICS CO LTD
卖方: SHENZHEN PORSTAR ELECTRONICS CO LTD
卖方: SHENZHEN PORSTAR ELECTRONICS CO LTD