Sucker Rod Pump
As one of the oil equipment suppliers, Saigao Groupspecializing in design, research, and development, processing, and manufacturing. sales and export of machinery equipment, with leading products comprising various kinds of mudpumps, down-hole motors, any kinds of screen pipes, cementing tools as well as any kinds ofwellhead equipment.
The suck rod pumpcan be sunk into wells in sequence as follows: barrel is run down to the setting depth on the tubing and then plunger with the standing valve on the rod string. For tubing of same diameter, tubing pumps are always of larger capacity than insert pumps. The standing valve rod pumpis simple in structure and applicable for wells not too deep and of higher production rate.
Tubing pumps are classified as THD pumps and THC or THM pumps. The standing valve of THC or THM pump can be hold and sealed by a mechanical or cup hold-down. Plunger together with standing valve can be lifted out integrally for normal pump check, with the tubing remain intact. This makes the tubing pumps suitable for wells usually with short pump check intervals.
What is a Sucker Rod Pump
A downhole sucker rod pump refers to a artificial pump system linking the underground pump assembly with the ground-based parts that are used to boost the pumping motion. A downhole sucker rod pump is designed to create a mechanical lifting motion. The sucker rod pump system consists of a walking beam, the power shaft, cranks, counter weighs, horsehead and the polished rod.
As one of the most reliable sucker rod suppliersand professional down hole pump manufacturersin China, Saigao works hard to provide high quality sucker rod pump for oil and gas field.
Specifications for Tubing Pumps:
Insert Pumps
The insert pump can be connected to sucker rod on the surface and then lowered into the wells integrally through the tubing. Pump checks are easy and without the need of pulling and running the tubing. This makes it especially suitable for deep well applications. Reduced running time and make-and-breaks can surely enhance tubing working life. Insert pumps are clarified as mechanical and cup hold-down pumps by hold-down types or as top hold-down, bottom hold-down and traveling barrel insert pumps by hold-down positions.
Specialty Sucker Rod Pumps
Specialty sucker rod pumps are applicable for sand, live or high viscous wells, slant wells, or for use in zonal production or casingless production. They have been used in many oilfields with good efficiency.
Various types of specialty sucker rod pump partsand accessories as follows can be designed and made for actual applications and upon client's request:
lPlungers electroplated in deep well and then forcefully honed on machines, with electroplated length up to 9m for plungers and longer than 10m for rods and barrel items;
lOptional stainless-steel plungers, electroplated plungers or Ni-P coated plungers by spray welding processes;
lHigh precision valve balls and seats in various materials such as stainless steel, ceramic and carbide.
The sucker rod china/china sucker rodpumps produced by Saigao have high strength and toughness. If you are looking for China sucker rod pump manufacturerswho can establish cooperative relationships, we are your best choice.
在线联系供应商
Other supplier products
 |
Non-rotating Stabilizer | Non-rotating stabilizer(rubber sleeve stabilizer) is able to avoid blade wear and wall damage during. The non-rotating stabilizer consists of mandr... |
 |
Key Seat Wiper | Sliding sleeve type key seat reamer consists upper sub, mandrel, lower sub, sliding sleeve and so on, as shown in diagram. The sliding sleeve could... |
 |
Drill Pipe Single Plug Cement Head: Product No. ZSC-03 | Plug Dropping Indicator. Plug release Plunger Assembly. Pitching device. Bearing, rotating easy. Plug valves threaded connection. The type cem... |
 |
8-5/8'' Casing Pipe | Oil casing is the lifeline for maintaining oil well operations. Due to different geological conditions, the state of the downhole is complicated, a... |
 |
Circulating Swage | SAIGAO GROUPCirculating Swage is forged from high-grade steel materials and machined to the required specifications. After heat treatment and non-d... |
Same products
 |
Gr50 Pneumatic Conveying Equipment/Cast Iron Blow Through Airlock Valve | 卖方: Greentech International (Zhangqiu) Co., Ltd | Rotary feeder is also called rotary pocket feeder or airlock machine.The structure of normal rota... |
 |
Gr400 Pneumatic Conveying Equipment/Pneumatic High Pressure Conveying Equipment | 卖方: Greentech International (Zhangqiu) Co., Ltd | Rotary feeder is also called rotary pocket feeder or airlock machine.The structure of normal rota... |
 |
Greentech GR220 Electric Star Feeder | Rotary Airlock Valve Seals for Pneumatic Conveying Systems 6 Months Warranty 310kg | 卖方: Greentech International (Zhangqiu) Co., Ltd | Customized Support: Tailored solutions for industrial machinery needs. High-Quality Electric P... |
 |
Intelligent Precision Glue Control System | 卖方: 855005 | Intelligent Precision Glue Control System The Golden Horse GM-4020 is an intelligent glue concen... |
 |
JM-5416D Automatic Rigid Box Making Machine | 卖方: 855005 | JM-5416D Automatic Rigid Box Making Machine The JM-5416Dintelligent visual fully automatic box m... |
