Rotary Table
DRO/CNC Rotary Table is a patented machine with our own design. Rotary Table casting is together with the oil recycle system, it makes the machine very clean and beautiful. SEALION supply cheap rotary tables from 10T up to 250T.
Features of Rotary Table
The horizontal cnc rotary tableis an accessory for the CNC floor type boring and milling machine. It can be working together with the floor type boring machinefor milling angle, reverse boring, polyhedral machining, and other complex machining processes. It could do five sides machining if the main machine equipped the angle milling head.
Sealion supplies cheap rotary tables from 10T to 250T loading, both CNC and DRO type. It can be tailor-made for your own boring machine.
Application Scope of CNC Rotary Table
CNC rotary table is a common part of CNC milling machine, often used as a servo axis of CNC milling machine, namely C axis of vertical CNC milling machine and B axis of horizontal CNC milling machine. The CNC rotary table includes the foot of the turntable, a round turntable surface, four rolling bearing parts arranged on the upper surface of the foot of the turntable, and a center with a self-aligning bearing installed at the center of the upper surface of the foot of the turntable. Support, each rolling bearing component includes a rolling bearing and a support that supports the rolling bearing through the axle. The center of the lower surface of the turntable is provided with a vertical downward axle. The turntable is installed on the foot of the turntable. The inner ring of the self-aligning bearing is fixed, and the rotating surface of the rolling bearing is in rolling contact with the lower surface of the turntable surface.
The CNC rotary table has an inclinometer with two orthogonal test axes as the test tool. The inclinometer is set at the center of the turntable surface to be leveled, so that the two orthogonal test axes of the inclinometer are parallel to the turntable surface, by adjusting the milling machine turntable. The leveling mechanism under the base makes the tilt angle value output by the two test shafts of the inclinometer turntable in the leveling state.
CNC rotary table and swing head are the key components of multi-coordinate CNC machine tools. Traditional rotary tables and swing heads using high-precision worm gears and other transmissions are not only difficult to manufacture, costly, but also difficult to achieve the speed and accuracy required for high-speed machining. Therefore, it is necessary to develop a new electromagnetic drive system for the CNC milling machine turntable and swing head in a different way to realize the zero-drive drive of the rotational motion coordinates of the CNC machine tool.
Working Principle of Rotary Table
Advantages of Rotary Table
The rotary bearing of the table adopts double row cylindrical roller bearings and central unloader equipment which enhanced the accuracy of the table
The working table linear guideway is coated with plastic tapes and the rotary motion fitted with the compound guideway. It makes the machine better accuracy and easy maintenance.
The linear traveling system is composed of anti-backlash reducer and ballscrew. The rotary traveling system is driven by the servo motor and double pinion gearbox. Those features guarantee the best accuracy.
The linear scale is the standard for linear movement. The high accuracy rotary encoder is also optional for the rotary movement. It can be a full closed-loop machine.
The table can work separately from the main machine with its own system and handwheel.
Parameters of Rotary Table
Item |
HT10 |
HT20 |
HT30 |
HT40 |
HT50 |
HT100 |
HT200 |
Table Size (mm) |
1500x1500 |
1500x2000 |
2000x2000 |
2500x2500 |
2500x3000 |
2500x3000 |
3000x3500 |
Max Load of Table (T) |
10 |
20 |
30 |
40 |
50 |
100 |
200 |
Linear Travel of Table (mm) |
1500 |
1500 |
2000 |
2000 |
2500 |
3000 |
3000 |
System |
Fanuc |
Fanuc/ |
Fanuc/ |
Fanuc/ |
Fanuc/ |
Fanuc/ |
Fanuc/ |
/Siemens |
Siemens |
Siemens |
Siemens |
Siemens |
Siemens |
Siemens |
在线联系供应商
Other supplier products
Conventional Lathe | Conventional Latheis perfectly suitable for small volume production plant and machinery maintenance shops and can machine a wide range of materials... | |
5.Slant Bed CNC Lathe | Looking for the best deal of machine tools? You are here in the right place. Sealion is one of the CNC machine tools factorywho can always help you... | |
Gantry Machining Center | SEALION supplies Gantry Machining Centerboth tables moving type or gantry moving type. Gantry type machining centeris widely used in the aviation, ... | |
Gantry Machining Center | SEALION supplies Gantry Machining Center both tables moving type or gantry moving type. Gantry type machining center is widely used in the aviation... | |
Double Column Vertical Lathe | Conventional Double Column Vertical Lathe, Regarding the column heightening model, there is a double sliding column system. The cross beam can move... |
Same products
LEN503 Nebulizer | 卖方: Lepu Medical Technology(Beijing)Co.,Ltd | Cute pet caring Small atomized particles nebulizer machine for kids Adjustable atomizing cup H... | |
SINOART Shanghai Co., Ltd. | 卖方: SINOART Shanghai Co., Ltd. | SINOART specializes in a series of easels, artist canvas, produced by Jinhua GOWIN and PAN’... | |
FPQ2W-10/3T20 10kV Pin Insulators | 卖方: Guangdong Yufeng Industries Co.,Ltd | The crimping process of polymer pin type insulatorsshould pay attention to the crimping force, co... | |
洪都拉斯人工授精液氮罐KGSQ杜瓦瓶 | 卖方: 河南天之道生物科技有限公司 | 养殖行业中对畜牧液氮罐有着广泛使用,尤其在精子的冷冻与储存,远距离大规模配种方面,有着不可替代的作用。它伴随现代养殖技术出现,随着市场需求持续改良,容量和性能随着时间推移,前者越加丰富,后者更加... | |
布隆迪液氮杜瓦精液罐KGSQ | 卖方: Henan Tianzhidao Biological Technology Co., Ltd. | 养殖行业中对畜牧液氮罐有着广泛使用,尤其在精子的冷冻与储存,远距离大规模配种方面,有着不可替代的作用。它伴随现代养殖技术出现,随着市场需求持续改良,容量和性能随着时间推移,前者越加丰富,后者更加... |