ZM-R7220A Infrared Soldering Station
ZM-R7220A infrared SMD rework station is an intelligent infrared soldering stationwith real-time temperature monitoring, optical alignment system, rapid heating, and cooling. As an ir soldering station manufacturer, Zhuomao promises to provide high-quality infrared BGA reworkmachines. Significantly, Zhuomao's infrared soldering station price is reasonable. Plus, Seamark ZM-R7220A ir rework station is also called zm r6200cin the past.
Functions of R7220A Infrared Soldering Station (ZM R6200)
01 Real-time Temperature Monitoring
Real-time temperature display, with automatic curve analysis function.
02 Optical Alignment System
High-definition CCD (2m pixels) digital imaging, automatic optical zoom system, manual control and laser red-dot alignment.
03 Rapid heating and cooling
The IR preheating zone is heated by a medium wave ceramic infrared heating plate, a multi-functional movable PCB fixing bracket, and a BGA bottom support frame. Laminar integrated cooling fan.
As one of the top infrared soldering station suppliers in China, Seamark ZM is famous for its rich technical force, complete detection means, reliable product quality, and full service. If you want to know the BGA repair machine and to get a perfect infrared soldering station price for your factory, please contact Seamark ZM first.
Specification Of R7220A IR Infrared BGA Rework Station (ZM R6200C)
|
Power Supply |
AC220V±10% 50/60HZ |
|
Power |
|
|
PCB Size |
412*370mm(Max);6*6mm(Min) |
|
BGA Chip Size |
60*60mm(Max);2*2mm(Min) |
|
IR Heater Size |
285*375mm |
|
Temperature Sensor |
1 pcs |
|
Operation Method |
7" HD touchscreen |
|
Control System |
Autonomous heating control system V2（software copyright） |
|
Display System |
15" SD industrial display (720P front screen) |
|
Alignment System |
2 Million Pixel SD digital imaging system, automatic optical zoom with laser red-dot indicator |
|
Vacuum Adsorption |
Automatic |
|
Alignment Accuracy |
±0.02mm |
|
Temperature Control |
K-type thermocouple closed-loop control with accuracy up to ±3℃ |
|
Feeding Device |
No |
|
Positioning |
V-groove with universal fixture |
|
Dimensions |
L685*W633*H850mm |
|
Weight |
76KG |
Difference Between A Hot Air Rework Station And An IR Infrared BGA Rework Station
The main difference between a hot air rework station and an IR BGA Rework Station is the way they heat the board. A hot air rework station uses heated air to transfer heat from the tool-to-board interface and into the solder balls, whereas an IR BGA Rework Station uses infrared light to heat up just enough of each ball so that it melts.
The next important difference is how they control temperature: Hot Air rework stations use PID temperature control, but IR BGA Rework Stations use proportional pressure modulation (PPM). PPM is more precise than PID because it can monitor changes in pressure within milliseconds. This means that when applying flux to a board or when reflowing solder balls on a board, you can rapidly respond by adjusting your PPM settings as necessary. With PID, this would take about 20 seconds per change due to slow response times in most systems.
Another key difference lies in airflow control systems; hot air has no need for specialized airflow since there's no need for cooling during reflow since all of that happens outside of the oven chamber using an external fan which blows across all areas equally regardless if they are close or far away from each other.
If you have needs to buy bga x ray inspection equipment, please contact us.
在线联系供应商
Other supplier products
 |
X5600 Offline X-ray Inspection Machine | X5600is a small precise microfocus X-Ray inspection equipment, suitable for R&D enterprises, laboratories, quality inspection rooms, etc. It is... |
 |
ZM-R7830A Smart Optical BGA Rework Station | R7830A is an optical alignment automatic rework equipment. It also works as laser BGA SMD rework station, multi-language menu interface, automatic ... |
 |
Inline X-Ray Inspection Machine | In the inspection process of electronic components, the pcb x ray inspection machine can be directly connected to the SMT production line for high-... |
 |
XB8200 X-Ray Lithium Battery Inspection Series | XB8200 is mainly used for automatic online detection of positive and negative alignment during the production of square polymer soft pack batteries... |
 |
ZM-R720A LED/Micro Component Rework Station | The ZM-R720A micro BGA rework stationis a precision optical intelligent BGA rework station suitable for the rework of precision microdevices. This... |
Same products
 |
Intelligent Precision Glue Control System | 卖方: 855005 | Intelligent Precision Glue Control System The Golden Horse GM-4020 is an intelligent glue concen... |
 |
JM-5416D Automatic Rigid Box Making Machine | 卖方: 855005 | JM-5416D Automatic Rigid Box Making Machine The JM-5416Dintelligent visual fully automatic box m... |
 |
Positioning Machine JM-600B | 卖方: 855005 | Positioning Machine JM-600B The vision positioning machineis the core component for producing li... |
 |
Automatic Feida Gluing Machine JM-600A | 卖方: 855005 | Automatic Feida Gluing Machine JM-600A Automatic Gluing Machineis used for gluing the cover pape... |
 |
Automatic Grooving Machine JM-1200 | 卖方: 855005 | Automatic Grooving Machine JM-1200 The JM-1200 Automatic Cross Grooving Machineis capable of bid... |
