CNC HORIZONTAL TURNING LATHE CENTER FOR WHEEL HUB
The CNC horizontal turning lathe center bed adopts "mineral casting" material and technology of Germany, which guarantees DEED CNC horizontal turning center with better performance on accuracy maintenance and stability for a longer time. DEED model HP800-WC cnc turning machine for sale is mainly used for turning to machine of 12-22inch passenger car wheel and truck bus wheel, CNC horizontal turning lathe center also can be used for turning of similar disc parts.
FEATURES OF CNC HORIZONTAL TURNING CENTER LATHE FOR WHEEL HUB
*Mineral casting rectangular hard rail bed has good seismic resistance, small thermal sensitivity coefficient, and good overall rigidity.
*Mineral casting spindle box has small vibration, high speed, and high efficiency, which is about 30% higher than the market average.
*According to the needs of the cnc horizontal turning center industry, specially ordered imported spindle units for machine tools.
*Automatic door structure, less time to open and close the door (within 2S).
*The chip conveyor is separated from the water tank, which makes cleaning and maintenance more convenient
*More reasonable internal layout and strong cooling of flushing chips to avoid chip accumulation without manual cleaning.
*The extremely ingenuity cnc horizontal turning center design brings a more convenient operation and clamping experience.
BENEFITS OF CNC HORIZONTAL TURNING CENTER LATHE FOR WHEEL HUB
Mineral casting 45°slant bed. -The maximum length of embedded parts is 1750mm.
45 steel hardened with hardness HRC52 ~ 61.
During cnc horizontal turning center assembly, the accuracy of the linear guideway rail is less affected by temperature.
The cnc horizontal turning center bed is stable with minimal vibration.
The diameter of embedded parts reaches Φ 400mm.
Compared with iron casting HT300, mineral casting the vibration amplitude during cnc horizontal turning center machining is reduced by 20%.
For a 9.0x22.5 inch truck and bus wheel, rough and finish turning speed can be stable at 1000 pm.
Φ160 combined bearing. -High precision and rigidity.
Multi-wedge belt drive reduces the influence of the belt on high-speed rotation accuracy. -Multiple sealing structures to prolong service life.
HOW DOES CNC HORIZONTAL TURNING CENTER LATHE FOR WHEEL HUB WORK?
CNC horizontal turning center adopts brake belt brake, which is mainly composed of brake wheel, brake belt, and lever. In the brake device, the brake wheel is a steel disc connected with the shaft by splines. A layer of steel mesh asbestos is fixed on the steel brake belt and the inner side to improve the friction coefficient. One end is linked with the spindle box, and the other end is fixed on the upper end of the lever. The brake belt of the horizontal lathe can be adjusted. The brake belt can be placed and adjusted by directly loosening the screw connecting the brake belt and the spindle box. When the CNC horizontal turning center is adjusted properly, the brake belt can be released when the spindle rotates, but when the clutch is released and the horizontal lathe is stopped, the brake belt holds the brake wheel tightly, so as to realize the rapid stop of the spindle and achieve braking.
WHAT IS A CNC HORIZONTAL TURNING CENTER LATHE FOR WHEEL HUB USED FOR？
DEED CNC Horizontal Turning Lathe Center HP800-WC for wheel machining application: Passenger car wheel, truck, and bus wheel machining first procedure, a second procedure, finish turning to the machine. After the coating of some passenger, wheels is completed, the "finish turning" process is required for side A (front). According to different processes, it can be divided into the following "finish turning": bright surface, super-bright surface, sub mirror surface, and mirror surface. The general criteria for evaluating the "finish turning" ability of wheel machining machine tools: clear and uniform lines, high finish, no light, and dark lines, no over cutting, etc.
CNC HORIZONTAL TURNING CENTER LATHE FOR WHEEL HUB SPECIFICATION
HTC800
Feed Maximum rotation diameter φ850 mm
Maximum wheel diameter 22" inch
Maximum length wheel 12" inch
X axis travel -30~370mm
Z axis travel 850mm
X/Z axis rapid traverse 20/20 m/min
Spindle Spindle max speed 2500 rpm
Spindle power 30/37 kW
Spindle torque 375 N.m
Spindle nose specification A2-8
Spindle neck φ160 mm
ATC Tool quantity 8
Inner diameter tool size φ50 mm
Maximum outer diameter hilt size 32*32 mm
Adjacent tool change time 0.6 sec
Screw X-axis φ50*P10 mm
Z-axis φ50*P10 mm
Precision X-axis positioning 0.008 mm
Z-axis positioning 0.008 mm
X-axis repeatability 0.006 mm
Z-axis repeatability 0.006 mm
Others X/Z axis servo motor power 4/4 kW
X/Z axis servo motor torque 22/22 N.m
X/Z servo motor max speed 3000 rpm
Cooling water tank capacity 600 L
Machine size(not including chip conveyor) 4169*2150*2147 mm
Machine net weight 11 T
Control system FANUC 0i-TF
HTC900
Feed Maximum rotation diameter φ850 mm
Maximum wheel diameter 22" inch
Maximum length wheel 12" inch
X axis travel -30~370mm
Z axis travel 850mm
X/Z axis rapid traverse 20/20 m/min
Spindle Spindle max speed 2500 rpm
Spindle power 30/37 kW
Spindle torque 375 N.m
Spindle nose specification A2-8
Spindle neck φ160 mm
ATC Tool quantity 8
Inner diameter tool size φ50 mm
Maximum outer diameter hilt size 32*32 mm
Adjacent tool change time 0.6 sec
Screw X-axis φ50*P10 mm
Z-axis φ50*P10 mm
Precision X-axis positioning 0.008 mm
Z-axis positioning 0.008 mm
X-axis repeatability 0.006 mm
Z-axis repeatability 0.006 mm
Others X/Z axis servo motor power 4/4 kW
X/Z axis servo motor torque 22/22 N.m
X/Z servo motor max speed 3000 rpm
Cooling water tank capacity 600 L
Machine size(not including chip conveyor) 4169*2150*2147 mm
Machine net weight 11 T
Control system FANUC 0i-TF
Most Required CNC Machines
5 axis gantry type machining center
Horizontal boring and milling center
CNC drill tap machine
Planer type horizontal boring machine
Horizontal machining center with pallet changer
Other supplier products
供应产品
Same products
