Rotary Table
DRO/CNC Rotary Table is a patented machine with our own design. Rotary Table casting is together with the oil recycle system, it makes the machine very clean and beautiful. SEALION supply cheap rotary tables from 10T up to 250T.
Features of Rotary Table
The cnc turntablesis an accessory for the CNC floor type boring and milling machine. It can be working together with the floor type boring milling machine for milling angle, reverse boring, polyhedral machining, and other complex machining processes. It could do five sides machining if the main machine equipped the angle milling head.
Sealion supplies cheap rotary tables from 10T to 250T loading, both CNC and DRO type. It can be tailor-made for your own boring machine.
Application Scope of CNC Rotary Table
CNC rotary table is a common part of CNC milling machine, often used as a servo axis of CNC milling machine, namely C axis of vertical CNC milling machine and B axis of horizontal CNC milling machine. The CNC rotary table includes the foot of the turntable, a round turntable surface, four rolling bearing parts arranged on the upper surface of the foot of the turntable, and a center with a self-aligning bearing installed at the center of the upper surface of the foot of the turntable. Support, each rolling bearing component includes a rolling bearing and a support that supports the rolling bearing through the axle. The center of the lower surface of the turntable is provided with a vertical downward axle. The turntable is installed on the foot of the turntable. The inner ring of the self-aligning bearing is fixed, and the rotating surface of the rolling bearing is in rolling contact with the lower surface of the turntable surface.
The lathe rotary tablehas an inclinometer with two orthogonal test axes as the test tool. The inclinometer is set at the center of the turntable surface to be leveled, so that the two orthogonal test axes of the inclinometer are parallel to the turntable surface, by adjusting the milling machine turntable. The leveling mechanism under the base makes the tilt angle value output by the two test shafts of the inclinometer turntable in the leveling state.
CNC rotary table and swing head are the key components of multi-coordinate CNC machine tools. Traditional rotary tables and swing heads using high-precision worm gears and other transmissions are not only difficult to manufacture, costly, but also difficult to achieve the speed and accuracy required for high-speed machining. Therefore, it is necessary to develop a new electromagnetic drive system for the cnc mill rotary tableand swing head in a different way to realize the zero-drive drive of the rotational motion coordinates of the CNC machine tool.
Working Principle of Rotary Table
Sealion Machine Tool is acnc rotary table manufacturers, we provide cnc boring machine, rotary table for cnc machine, horizontal cnc rotary table, china cnc lathe service, chinese machine toolsand etc. Want to knowmore?Please contact us.
在线联系供应商
Other supplier products
 |
Horizontal Lathe | Sealion Machine Tool supplies a wide range of horizontal lathe. CNC type or conventional type, flat bed or slant bed, horizontal turning lathe, hor... |
 |
Vertical Lathe | Sealion Machine Tool supplies a wide range of vertical lathe machine -- single column vertical lathe, 2-axis CNC single column vertical lathe, doub... |
 |
Gantry Machining Center | SEALION supplies gantry type vertical machining center both tables moving type or gantry moving type. Gantry cnc machine center is widely used in t... |
 |
3.Hydrostatic Rotary Table | Looking for the best deal of machine tools? You are here in the right place. Sealion is one of the CNC machine tools companywho can always help you... |
 |
Double Column Vertical Lathe | Conventional Double Column Vertical Lathe, Regarding the column heightening model, there is a double sliding column system. The cross beam can mov... |
Same products
 |
SINOART Shanghai Co., Ltd. | 卖方: SINOART Shanghai Co., Ltd. | SINOART specializes in a series of easels, artist canvas, produced by Jinhua GOWIN and PAN’... |
 |
FPQ2W-10/3T20 10kV Pin Insulators | 卖方: Guangdong Yufeng Industries Co.,Ltd | The crimping process of polymer pin type insulatorsshould pay attention to the crimping force, co... |
 |
Electroplated Tools | 卖方: Henan E-Grind Abrasives Co., Ltd. | Henan E-Grind Abrasives Co., Ltd. produces electroplated tools by plating diamond or CBN grains w... |
 |
Electroplated Diamond Tools | 卖方: Henan E-Grind Abrasives Co., Ltd. | Electroplated diamond drill bitscan be made in various shapes, so it will be an excellent option ... |
 |
Electroplated CBN Tools | 卖方: Henan E-Grind Abrasives Co., Ltd. | Electroplated cbn wheelcan be made in various shapes, so it will be an excellent option when the ... |
