Chinese high speed precision cnc lathe for sale
Chinese high speed precision cnc lathe for sale
These series are economical CNC horizontal lathe, which are not only suitable for automobiles, tractors, militaries, machines and other industries, but also can be used for the machining of the inner and outer cylindrical surface, conical surface, circular arc surface, end face, groove cutting etc.
|
UNIT |
CKP61125 |
||
|
CAPACITIES |
Swing over bed |
mm |
1250 |
|
Swing over carriage |
mm |
880 |
|
|
Max.length of workpiece |
mm |
3000 |
|
|
Max.turning length |
mm |
2730 |
|
|
Pan of guideway |
mm |
755 |
|
|
SPINDLE |
Spindle nose |
A2-15 |
|
|
Spindle bore |
mm |
130 |
|
|
Taper hole of spindle |
1:20/140 |
||
|
Range of spindle speeds |
r/min |
3.15~315 |
|
|
No.of spindle speeds |
Manual four gear, the file Promise |
||
|
Center height from bed |
mm |
625 |
|
|
Chuck |
mm |
1000 |
|
|
FEED |
Min.feed increment |
mm |
0.001/0.001 |
|
Rapid speeds |
mm/min |
3000/6000 |
|
|
Max.travel |
mm |
580 |
|
|
TURRET |
Turret working position |
V4 |
|
|
Indexing time |
s |
2.6 |
|
|
indexing repeatility |
mm |
0.01 |
|
|
Section of tool shank |
mm |
40X40 |
|
|
TAILSTOCK |
Dia. of tailstock quill |
mm |
160/300 |
|
Travel of tailstock quill |
mm |
160/300 |
|
|
Taperhole of tailstock |
Morse6 |
||
|
OTHERS |
Workpiece accuracy |
IT6~IT7 |
|
|
Surface roughness |
μm |
Ra1.6 |
|
|
Main power |
kw |
22 |
|
|
Lathe mass |
kg |
11000 |
|
|
Length |
mm |
6000 |
|
|
Width/Height |
mm |
2600/2600 |
|
|
CNC System |
FANUC Series0i-mate-TD/0i-TD |
||
there are two layers of skateboard (medium, small skateboard), the saddle and the frame body together. Used to install the lathe tool and drive the lathe tool for longitudinal, transverse or oblique movement.
have always been devoting to the research and manufacture of machine tools. We haveLATHE, CNC LATHE, PIPE THREAD LATHE, SPHERE TURNING LATHEetc. We have the most professional research and development machines, who can meet all different requirements on technology and production. Welcome to contact us !
Pre -Sale
♠Accordingtoclientsrequirement(Purchasepurpose),wecanofferserviceasfollowing:
♠Projectsystemevaluationinvestmentbudget
♠Sitemeasurement
♠Technicaldiscussion
♠Supplyprofessionaldrawingandlists
In-sale
♠Qualityguaranteed
♠Fieldserviceforequipmentinstallationandtrainingwork
♠Acceptanceanddelivery
Afer-sale
♠24honineresponse
♠Supplyingsparepartsatcostprice
♠Regularreturnvisit
在线联系供应商
Other supplier products
 |
Homemade new Dia. of spindle hole 130mm spherical turning lathe on sale | Homemade new C6595 Dia. of spindle hole 130mm spherical turning lathe on sale The spherical lathe is mainly used for the turning machining of sp... |
 |
tubing upsetting press | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
 |
High qualified rate | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
 |
View larger image Chinese heavy duty lathe machine with good service Chinese heavy duty lathe machine with good service Chinese heavy duty lathe machine with good service Chinese heavy duty lathe mac | Chinese heavy duty lathe machine with good service This machine not only processing a variety of shaft, disk type parts and turning all kinds of ... |
 |
tube end upset machine | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
