Tumble Belt Type Shot Blasting Machine
Product Parameters:
|
parameter |
Q15GN tumble belt type shot blasting machine |
Q28GN tumble belt type shot blasting machine |
|
Size of the roller(mm) |
1090*1245 |
1245*1778 |
|
Diameter of endshiled (mm) |
1092 |
1250 |
|
Working capacity(m3) |
||
|
Unit piece weight(kg) |
227 |
363 |
|
Size of working piece(mm) |
1000 |
1000 |
|
Loading weight(kg) |
800 |
3500 |
|
Blasting qty( kg) |
480 |
340*2 |
|
Blasting wheel ower(kw) |
30 |
22 |
Shandong Kaitai Group Co., Ltd. is the largest manufacturer of , metal abrasive in Asia which integrates with technical research, development and production. Cooperating with Material Science & Engineering College of Shandong University and guided by experts and professors of metal abrasive field. The company has developed 8 series including , , steel cut wire shot, stainless steel shot, stainless steel cut wire shot,
aluminium shot, zinc shot, copper shot, 80 kinds of abrasive products. The company could produces 250,000 tons metal abrasive. Based on 300 million Yuan (RMB) of fixed assets, with a yearly turnover of 500 million Yuan (RMB). Kaitai Steel Shot Abrasive (HONGKONG) Co., Ltd. is in charge of overseas sales of steel shot, steel grit.The company is Advanced & New Technology Enterprise of Shandong Province and National Blasting & Peening Standardization Technology Committee Unit. With strong technical force, advanced equipments like intermediate frequency induction furnace, centrifugal blasting machine and so on. The company could produces high strength, strong durability cast steel shot, cast steel grit through double quenching, tempering, screening and so on. The company has perfect quality control system. The company has introduced two Ervin Test Machine from USA. Ervin Test Machine is mainly used for testing fatigue life of metal abrasive.
在线联系供应商
Other supplier products
 |
Sand Blasting Room | Product Features: Adopting compressed air as driving force and abrasives as media to blast the metal surface, a complete sand blast room should ... |
 |
Vacuum Recovery System | Product Features: The manual type metal abrasive recovery wastes time and resources, but the will do this job in a most efficient, economical an... |
 |
Centrifugal Fan | centrifugal fan can be used as indoor ventilator in general factories and large buildings, it deliver air and other gas which is harmless, non-sp... |
 |
H Beam Special Shot Blasting Machine | Product Features: Used for cleaning and strengthening metal surface,it can remove oxide mill and rust for different kind of steel profiles. W... |
|
|
Q32 Series Tumble Belt Type Shot Blasting Machine | Product Features: It is suitable for different production scale.it could be stand-alone use and many units can also be used together. It could ... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
