Tungsten Carbide Bars Strips Plates for Wood Stone
Application
Our carbide strips and plates are with high hardness, wear-resistance and bending strength.They're widely used in cutting tool, crusher, wear parts, mould base, etc.
We produce various sizes, such as 20*20mm, 50*50mm, 100*100mm, 200*200mm, and customized sizes are also welcomed.
Advantages
--Various sizes available
--High hardness andwear resistance, goodbending strength
--Professional technical teams
--5 tons output per month, fast delivery time
在线联系供应商
Other supplier products
 |
HSS/Tungsten Carbide Drill Bits/cutter Specially for Wood Working /Cutting Tool | Item:woodworking drill bit Flutes:2&4 flutes Type: left & right Sizes:12x75,etc Application: Suitable for hard and soft wood, For cutting ... |
 |
Yk05 / Yk20 Tungsten Carbide Rock and Mining /Drilling Tools Bits/ Button/ Tips | Tungsten carbide buttons are mainly used for high and low pressure DHT drill and hydraulic Screw-in drill and so on. They are suitable for hot inse... |
 |
Unground and polished tungsten cemented carbide rods | Tungsten Carbide Rods advantage 1.Material: 100% virgin raw material with submicron grain size; 2.Grade: Various grades for choice; 3.With strict t... |
 |
K20 Wear Resistance Tungsten Carbide Strips/Bars/Plates/flat for wear parts | Item:carbide strip Grade:K10,K20 Sizes:3.3x8.3x310mm,or customized, Application:Compared with steel strips, tungsten carbide strips are much more w... |
 |
Tungsten cabide mining button bits/tips | 1).Optional grades: YK10/YK20/YK25/YK40/YG6C/YG8C/YG11C/YG13C/YG15C ; 2).Types: type Q(spherical),type Z(conical),type D(parabolic),type P(flat-top... |
Same products
 |
NGM-5.1数显轨道仿形磨床 | 卖方: Wuhan linkage track equipment co.,ltd | 产品描述 NGM-5.1钢轨仿形打磨机 该机主要用于铁路钢轨焊接接头及钢轨表面修复的成型打磨作业，数控进给单元的开发应用，实现了砂轮进给的智能控制，显著提高成型精度和... |
 |
NGM-4.8内燃数显钢轨打磨机 | 卖方: Wuhan linkage track equipment co.,ltd | 产品描述 NGM-4.8I数显轨道打磨机 NGM-4.8I数显钢轨打磨机适用于43kg/m-75kg/m钢轨焊缝、不平整接头、钢轨侧肥边、钢轨表面焊补等部位的打磨，是集多功能、自... |
 |
NCM-5.1 岔道磨床 | 卖方: Wuhan linkage track equipment co.,ltd | 产品描述 NCM-5.1 道岔打磨机 NCM-5.1道岔打磨机是专门针对道岔、交叉口及轨头两侧的打磨作业而设计的。该机打磨装置可从垂直方向向左右倾斜30°，并可沿纵横方向... |
 |
NGM-6.0钢轨成型磨床 | 卖方: Wuhan linkage track equipment co.,ltd | 产品描述 NGM-6.0 钢轨成型磨床 该机采用西班牙进口M165二冲程汽油发动机作为动力，是用于轨头焊缝成型打磨及表... |
 |
锂电池供电的马车螺丝冲击扳手机 | 卖方: Wuhan linkage track equipment co.,ltd | 产品描述 锂电池供电轨道螺栓扳手 锂电池供电轨道螺栓扳手机（型号：LJ-LDB171X）由主机、控制系统、电池系统、轨道行走部分组成。该机结构紧凑、重量轻、装拆灵活、使用方便、无废气... |
